{"title":"3D Printing","description":null,"products":[{"product_id":"anycubic-photon-p1-max-resin-3d-printer","title":"Anycubic Photon P1 Max Resin 3D Printer","description":"\u003cp\u003e\u003cstrong\u003eLarge-format MSLA resin printing | Intelligent levelling and monitoring | Ultra-fine 0.02 mm layer detail | Quiet enough for home or studio use\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint at scale with a massive 285.5 × 214 × 300 mm build volume — 18.3 litres of creative space in a single print cycle\u003c\/li\u003e\n\u003cli\u003eAchieve exceptional detail with layer heights as fine as 0.02 mm across the full build area\u003c\/li\u003e\n\u003cli\u003ePrint with confidence using Leveling-Free 3.0 with automatic self-check, so every session starts right\u003c\/li\u003e\n\u003cli\u003eMonitor and control your print remotely via the Anycubic App over Wi-Fi or Ethernet — no babysitting required\u003c\/li\u003e\n\u003cli\u003eEnjoy whisper-quiet operation at ≤45 dB, making it suitable for studio, workshop, or home environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScale Up Without Compromise\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Photon P1 Max is a large-format MSLA resin 3D printer built for creators, professionals, and production users who need serious build volume without sacrificing detail. With a 285.5 × 214 × 300 mm print volume — 18.3 litres of usable space — you can produce genuinely large models, dense batch runs, or tall intricate pieces in a single cycle, eliminating the need to split, glue, and re-align parts.\u003c\/p\u003e\n\u003ch3\u003ePrecision Engineering, Layer by Layer\u003c\/h3\u003e\n\u003cp\u003eTired of prints that look great in the slicer but disappoint on the platform? The Photon P1 Max is built to close that gap. A precision-ground steel build platform provides a stable, consistent adhesion surface, while the dual linear guide rails and ball lead screws on the Z-axis deliver smooth, repeatable motion with every layer. Layer heights range from 0.02 to 0.15 mm, giving you the flexibility to dial in ultra-fine detail or accelerate through faster, practical prints at up to 15–25 mm\/h.\u003c\/p\u003e\n\u003ch3\u003eIntelligent Assistance That Gets Out of Your Way\u003c\/h3\u003e\n\u003cp\u003eSetting up a large-format resin printer has traditionally been the most frustrating part of the process. The Photon P1 Max addresses this head-on with Leveling-Free 3.0 — a system that combines automatic levelling self-check before each print, levelling feedback with real-time force values at all four corners, and factory calibration so the machine is ready straight out of the box. Power loss resume means an unexpected outage does not mean a wasted print. The integrated camera enables remote print submission and real-time monitoring through the Anycubic App, with dual-network connectivity via Wi-Fi and Ethernet for flexible, secure operation.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Long Run\u003c\/h3\u003e\n\u003cp\u003eThe Photon P1 Max supports all Anycubic resins as well as 8000 cps high-viscosity resin, broadening your material options considerably. Dynamic temperature control on the resin vat helps maintain consistent resin viscosity during printing, while the hotbed can reach up to 35°C in ambient conditions of 5°C or above. Operating at ≤45 dB, it is quiet enough for a home workshop or shared studio space. Compatible slicer software includes Photon Workshop, Chitubox, Lychee, and Tango, so you can work in the environment you already know. Control is available via the 4.5-inch resistive touchscreen, the Anycubic App, or USB drive — whichever suits your workflow.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 285.5 × 214 × 300 mm (18.3L) build volume — print large single pieces or maximise batch output in one cycle\u003c\/li\u003e\n\u003cli\u003eMSLA resin printing technology with layer heights from 0.02 to 0.15 mm for fine detail across the full build area\u003c\/li\u003e\n\u003cli\u003eLeveling-Free 3.0 with automatic self-check, levelling feedback, and factory calibration — ready to print from first power-on\u003c\/li\u003e\n\u003cli\u003ePrecision-ground steel build platform paired with dual linear guide rails and ball lead screws on the Z-axis for repeatable accuracy\u003c\/li\u003e\n\u003cli\u003eDynamic temperature control on the resin vat maintains consistent viscosity; hotbed reaches up to 35°C at ≥5°C ambient\u003c\/li\u003e\n\u003cli\u003eIntegrated camera for remote print submission and real-time progress monitoring via the Anycubic App\u003c\/li\u003e\n\u003cli\u003eDual-network connectivity: Wi-Fi and Ethernet, plus USB Drive support for flexible print submission\u003c\/li\u003e\n\u003cli\u003eQuiet operation at ≤45 dB; compatible with Photon Workshop, Chitubox, Lychee, and Tango slicers\u003c\/li\u003e\n\u003cli\u003ePower loss resume protects in-progress prints from unexpected interruptions\u003c\/li\u003e\n\u003cli\u003eSupports all Anycubic resins and 8000 cps high-viscosity resin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting Volume: 285.5 x 214 x 300mm³\u003c\/li\u003e\n\u003cli\u003ePrinting Speed: 15-25 mm\/h (0.05 mm layer, Std Resin)\u003c\/li\u003e\n\u003cli\u003eLayer Height Range: 0.02-0.15 mm\u003c\/li\u003e\n\u003cli\u003eX\/Y Axis Resolution: 24.8 × 24.8 μm\u003c\/li\u003e\n\u003cli\u003eLight Source: COB + Fresnel + Mask\u003c\/li\u003e\n\u003cli\u003eLight Intensity: ≥4000μW\/cm²\u003c\/li\u003e\n\u003cli\u003eMaterial Compatibility: All Anycubic Resins\u003c\/li\u003e\n\u003cli\u003eBuild Platform: Precision-ground Steel Platform\u003c\/li\u003e\n\u003cli\u003eZ-axis: Dual linear guide rails + Ball lead screws\u003c\/li\u003e\n\u003cli\u003eRelease film: NFEP\u003c\/li\u003e\n\u003cli\u003eResin Vat: 1.9L\u003c\/li\u003e\n\u003cli\u003eMachine Leveling: Leveling-Free 3.0 + Leveling Feedback + Leveling Self-Check\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: Supported\u003c\/li\u003e\n\u003cli\u003ePower Supply: 296W\u003c\/li\u003e\n\u003cli\u003eProtection Film: Wave Release Film\u003c\/li\u003e\n\u003cli\u003eResin Auto-fill Unit: Not Supported\u003c\/li\u003e\n\u003cli\u003eDynamic Temperature Control Resin Vat: Supported\u003c\/li\u003e\n\u003cli\u003eSlicing Software: Photon Workshop( + Chitubox\/Lychee\/Tango)\u003c\/li\u003e\n\u003cli\u003eHinged Cover: Smooth Hinge (\u0026gt;45° stepless)\u003c\/li\u003e\n\u003cli\u003eOperating Screen: 4.5\" Resistive Touchscreen\u003c\/li\u003e\n\u003cli\u003eAir Purifier: Optional AirPure 2.0\u003c\/li\u003e\n\u003cli\u003eLCD Screen: 14\" Monochrome LCD (12K)\u003c\/li\u003e\n\u003cli\u003eAnycubic App: Supported\u003c\/li\u003e\n\u003cli\u003eMultilingual Support: EN \/ CN \/ DE \/ FR \/ IT \/ ES \/ RU \/ JP \/ PT \/ KR\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 430 x 414 x 625mm³\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 23100g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Photon P1 Max x1\u003c\/li\u003e\n\u003cli\u003ePrint Platform x1\u003c\/li\u003e\n\u003cli\u003eResin Vat x1\u003c\/li\u003e\n\u003cli\u003eWet Wipes x1\u003c\/li\u003e\n\u003cli\u003eHex Key Set x1\u003c\/li\u003e\n\u003cli\u003eProtective Equipment x1\u003c\/li\u003e\n\u003cli\u003eFilter x1\u003c\/li\u003e\n\u003cli\u003eScrapers x1\u003c\/li\u003e\n\u003cli\u003eUSB Drive x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eUser Manual x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Anycubic\u003c\/h3\u003e\n\u003cp\u003eAnycubic has been engineering desktop resin and filament 3D printers since 2015, combining precision mechanics with accessible, intelligent software to help makers, engineers, and artists bring their ideas to life. The Photon P1 Max reflects that commitment — a large-format machine designed to perform reliably, print after print, with the intelligence to help users of all experience levels succeed.\u003c\/p\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898433134639,"sku":"PP1MBK0B-O","price":24440.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/PP1MBK0B-O_Anycubic_Photon_P1_Max_Resin_3D_Printer_wr_02.png?v=1787925803"},{"product_id":"anycubic-kobra-3-max-0-4mm-stainless-steel-nozzle","title":"Anycubic Kobra 3 Max 0.4mm Stainless Steel Nozzle","description":"\u003cp\u003eThe Anycubic Kobra 3 Max 0.4mm Stainless Steel Nozzle is a genuine replacement nozzle designed specifically for the Kobra 3 Max and Kobra 3 Max Combo FDM 3D printers. Machined from stainless steel, this 0.4mm nozzle offers a durable swap-in option when your original nozzle shows signs of wear or clogging, helping you maintain consistent print quality without interruption. At just 10g, it is lightweight and straightforward to install, and the standard 0.4mm diameter suits a wide range of everyday filament printing tasks. A practical consumable to keep on hand for any Kobra 3 Max owner.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Anycubic replacement nozzle for the Kobra 3 Max and Kobra 3 Max Combo\u003c\/li\u003e\n\u003cli\u003e0.4mm nozzle diameter — suited to a wide range of FDM filament types\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for durability\u003c\/li\u003e\n\u003cli\u003eLightweight at 10g for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM printing technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4mm\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 12.6 x 7.7 x 1 cm\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 10g\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Kobra 3 Max 0.4mm Stainless Steel Nozzle x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898444439599,"sku":"S010364","price":200.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/S010364_Anycubic_Kobra_3_Max_04mm_Stainless_Stee_wr_01.jpg?v=1787926681"},{"product_id":"anycubic-s1-hotend-all-metal-hardened-steel-0-8mm-nozzle","title":"Anycubic S1 Hotend All Metal Hardened Steel 0.8mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003e0.8mm hardened steel nozzle | Direct replacement for Kobra S1 | All-metal construction | FDM compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic S1 Hotend Hard Steel 0.8mm Nozzle is a direct replacement hotend designed for the Anycubic Kobra S1 and Kobra S1 Combo FDM 3D printers. The all-metal hardened steel nozzle offers greater durability than standard brass alternatives, making it a practical upgrade or spare for demanding print runs. At 0.8mm, the nozzle diameter enables faster material throughput compared to finer nozzles, reducing print times on larger or less detail-critical parts. A straightforward swap to keep your Kobra S1 printing reliably.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0.8mm nozzle diameter for faster material throughput on larger prints\u003c\/li\u003e\n\u003cli\u003eAll-metal hardened steel construction for improved durability over brass nozzles\u003c\/li\u003e\n\u003cli\u003eCompatible with Anycubic Kobra S1 and Kobra S1 Combo\u003c\/li\u003e\n\u003cli\u003eFDM printer technology\u003c\/li\u003e\n\u003cli\u003eLightweight at 45g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.8mm\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Metal Hardened Steel\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 45g\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic S1 Hotend All Metal Hardened Steel 0.8mm Nozzle x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898444472367,"sku":"S010363","price":340.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/S010363_Anycubic-S1-Hotend-Hard-Steel-0.8mm-Nozzle_wr_01.jpg?v=1787926685"},{"product_id":"anycubic-s1-hotend-all-metal-hardened-steel-0-6mm-nozzle","title":"Anycubic S1 Hotend All Metal Hardened Steel 0.6mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003e0.6mm hardened steel nozzle | Direct replacement for Kobra S1 | All-metal construction | FDM compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic S1 Hotend Hard Steel 0.6mm Nozzle is a direct replacement hotend designed for the Anycubic Kobra S1 and Kobra S1 Combo FDM 3D printers. The all-metal hardened steel nozzle offers greater durability than standard brass alternatives, making it a practical upgrade or spare for demanding print runs. At 0.6mm, the nozzle diameter enables faster material throughput compared to finer nozzles, reducing print times on larger or less detail-critical parts. A straightforward swap to keep your Kobra S1 printing reliably.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0.6mm nozzle diameter for faster material throughput on larger prints\u003c\/li\u003e\n\u003cli\u003eAll-metal hardened steel construction for improved durability over brass nozzles\u003c\/li\u003e\n\u003cli\u003eCompatible with Anycubic Kobra S1 and Kobra S1 Combo\u003c\/li\u003e\n\u003cli\u003eFDM printer technology\u003c\/li\u003e\n\u003cli\u003eLightweight at 45g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.6mm\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Metal Hardened Steel\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 45g\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic S1 Hotend All Metal Hardened Steel 0.6mm Nozzle x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898444505135,"sku":"S010362","price":340.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/S010362_Anycubic_S1_Hotend_Hard_Steel_06mm_Nozzl_wr_01.jpg?v=1787926691"},{"product_id":"anycubic-s1-hotend-all-metal-hardened-steel-0-4mm-nozzle","title":"Anycubic S1 Hotend All Metal Hardened Steel 0.4mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003e0.4mm hardened steel nozzle | Direct replacement for Kobra S1 | All-metal construction | FDM compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic S1 Hotend Hard Steel 0.4mm Nozzle is a direct replacement hotend designed for the Anycubic Kobra S1 and Kobra S1 Combo FDM 3D printers. The all-metal hardened steel nozzle offers greater durability than standard brass alternatives, making it a practical upgrade or spare for demanding print runs. At 0.4mm, the nozzle diameter enables faster material throughput compared to finer nozzles, reducing print times on larger or less detail-critical parts. A straightforward swap to keep your Kobra S1 printing reliably.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0.4mm nozzle diameter for faster material throughput on larger prints\u003c\/li\u003e\n\u003cli\u003eAll-metal hardened steel construction for improved durability over brass nozzles\u003c\/li\u003e\n\u003cli\u003eCompatible with Anycubic Kobra S1 and Kobra S1 Combo\u003c\/li\u003e\n\u003cli\u003eFDM printer technology\u003c\/li\u003e\n\u003cli\u003eLightweight at 45g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4mm\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Metal Hardened Steel\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 45g\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic S1 Hotend All Metal Hardened Steel 0.4mm Nozzle x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898444537903,"sku":"S010361","price":340.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/S010361_Anycubic-S1-Hotend-Hard-Steel-0.4mm-Nozzle_wr_01.jpg?v=1787926695"},{"product_id":"anycubic-kobra-s1-max-combo-0-25mm-brass-nozzle","title":"Anycubic Kobra S1 Max\/Combo 0.25mm Brass Nozzle","description":"\u003cp\u003e\u003cstrong\u003ePrecision 0.25mm brass nozzle | Compatible with Kobra S1 Max\/Combo | Direct Anycubic replacement part\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Kobra S1 Max\/Combo 0.25mm Brass Nozzle is a genuine replacement nozzle designed for FDM 3D printing on the Kobra S1 Max and Kobra S1 Max Combo. The fine 0.25mm diameter allows for tighter detail resolution, making it a practical choice when your prints demand greater precision. Brass construction provides reliable heat transfer and compatibility with standard filaments, and the nozzle's lightweight 29g build keeps your hotend assembly running as intended. A straightforward swap to restore performance or step down to finer detail work.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0.25mm nozzle diameter for fine-detail FDM printing\u003c\/li\u003e\n\u003cli\u003eBrass material for reliable thermal conductivity and filament compatibility\u003c\/li\u003e\n\u003cli\u003eDesigned as a direct replacement for the Kobra S1 Max and Kobra S1 Max Combo\u003c\/li\u003e\n\u003cli\u003eLightweight at 29g — maintains hotend balance\u003c\/li\u003e\n\u003cli\u003e3-month warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.25mm\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Brass\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 29g\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Product (please verify box contents before approval)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898444570671,"sku":"S010360","price":340.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/S010360_Anycubic_Kobra_S1_MaxCombo_025mm_Brass_N_wr_01.png?v=1787926699"},{"product_id":"anycubic-photon-mono-m7-pro-resin-3d-printer-lcd-cable","title":"Anycubic Photon Mono M7 Pro Resin 3D Printer LCD Cable","description":"\u003cp\u003eThe Anycubic LCD Cable is a genuine replacement part designed for resin 3D printer owners who need to restore full touchscreen functionality to their Anycubic machine. Compatible with the Photon Mono M7 Pro Resin 3D Printer, this flat ribbon cable connects the control screen to the printer's mainboard, keeping your display responsive and your print workflow uninterrupted. A straightforward like-for-like replacement that gets your printer back up and running with minimal downtime.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Anycubic replacement control screen cable for compatible Anycubic resin printers\u003c\/li\u003e\n\u003cli\u003eCompatible with the Photon Mono M7 Pro Resin 3D Printer\u003c\/li\u003e\n\u003cli\u003eFlat ribbon design for neat, low-profile routing inside the printer chassis\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessory Type: Control Screen Cable\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: Resin\u003c\/li\u003e\n\u003cli\u003eCompatible Printer Models: Photon Mono M7 Pro Resin 3D Printer\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Photon Mono M7 Pro Resin 3D Printer LCD Cable x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898444603439,"sku":"E07020358","price":80.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/E07020358_Anycubic_Photon_Mono_M7_Pro_Resin_3D_Pri_wr_01.png?v=1787926703"},{"product_id":"anycubic-wash-and-cure-3","title":"Anycubic Wash and Cure 3","description":"\u003cp\u003e\u003cstrong\u003eTwo-in-one washing and curing station | Fits resin prints up to 165×100×180mm | Gooseneck light for targeted curing | 10×405nm LEDs for uniform results | Simple touch-button operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Wash \u0026amp; Cure 3 is a dedicated post-processing station for resin 3D printing, combining alcohol-based washing and UV curing in a single compact unit. The dual-layer PP cleaning basket accommodates build platforms at two adjustable heights (100mm and 165mm), supporting LCD printers up to 7.3\", while the 3L basket capacity and 4L bucket keep IPA usage efficient. For curing, ten 405nm LEDs work alongside a flexible gooseneck light to deliver localised strengthening on fine details and hard-to-reach areas, with a maximum curing volume of 3.18L to handle larger prints in a single session. An infinite rotary knob lets you dial in a timer anywhere from 1 to 30 minutes, and touch buttons switch cleanly between wash, cure, and FlexiCure modes. At 2.7kg and 216×217×310mm, it sits neatly on any workshop bench without taking up valuable space.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-mode operation — switch between washing and UV curing with touch-button controls\u003c\/li\u003e\n\u003cli\u003eMaximum cleaning volume of 165×100×180mm accommodates a wide range of resin prints\u003c\/li\u003e\n\u003cli\u003eMaximum curing volume of 3.18L for larger models in a single post-processing session\u003c\/li\u003e\n\u003cli\u003eTen 405nm LEDs plus a flexible gooseneck light deliver uniform and localised curing\u003c\/li\u003e\n\u003cli\u003eDual-layer PP cleaning basket with adjustable heights (100mm and 165mm) for compatibility with LCD printers up to 7.3\"\u003c\/li\u003e\n\u003cli\u003e3L cleaning basket capacity for efficient IPA usage\u003c\/li\u003e\n\u003cli\u003eAdjustable timer from 1 to 30 minutes via infinite rotary knob\u003c\/li\u003e\n\u003cli\u003eAlcohol soaking cleaning method — no specialist consumables required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting Volume:\n\u003cul\u003e\n\u003cli\u003eMaximum Cleaning Volume: 165 x 100 x 180mm\u003c\/li\u003e\n\u003cli\u003eMaximum Curing Volume: 3.18L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl and Print Methods: Touch Buttons\u003c\/li\u003e\n\u003cli\u003eTouchscreen: Touch Buttons\u003c\/li\u003e\n\u003cli\u003eCleaning Method: Alcohol Soaking\u003c\/li\u003e\n\u003cli\u003eTime Setting Range: 1–30 mins\u003c\/li\u003e\n\u003cli\u003eCleaning Basket Capacity: 3L\u003c\/li\u003e\n\u003cli\u003eUV Light Configuration: 10pcs*405nm LEDs + Gooseneck Light\u003c\/li\u003e\n\u003cli\u003eRated Power: 36W\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 21.6 x 21.7 x 31 cm\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 2700g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Wash \u0026amp; Cure 3 x1\u003c\/li\u003e\n\u003cli\u003eWashing Bucket x1\u003c\/li\u003e\n\u003cli\u003eWashing Basket x1\u003c\/li\u003e\n\u003cli\u003eHex Key Set x1\u003c\/li\u003e\n\u003cli\u003eRack Bar x1\u003c\/li\u003e\n\u003cli\u003eGooseneck Light x1\u003c\/li\u003e\n\u003cli\u003ePower Adapter x1\u003c\/li\u003e\n\u003cli\u003eCuring Table x1\u003c\/li\u003e\n\u003cli\u003eInstruction Manual x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449453103,"sku":"WS3B0WH-Y-O","price":2660.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/WS3B0WH-Y-O_ANYCUBIC_WASH_AND_CURE_3_wr_01.jpg?v=1787927388"},{"product_id":"anycubic-wash-and-cure-3-max","title":"Anycubic Wash and Cure 3 Max","description":"\u003cp\u003e\u003cstrong\u003eUltra-large 15.1L wash capacity | One-click automated washing and curing | Compatible with most mainstream LCD printers up to 13.6 inches | Customisable wash and cure modes | Intelligent error monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Wash \u0026amp; Cure 3 Max is built for serious resin 3D printing enthusiasts, studios, and professionals who need a reliable, high-capacity post-processing station. With a maximum wash capacity of 305 × 165 × 300 mm and a cleaning container capacity of 20L, it handles large and batch prints with ease — making it compatible with the Photon M3 Max, Photon Mono M7 Max, and most mainstream LCD printers with a build volume of 13.6 inches or smaller. One-click automation drives the full wash and cure cycle, eliminating messy manual handling, while three flexible modes — Auto (13–42.5 mins), Wash (10–39.5 mins), and Cure (0.5–30 mins) — let you dial in the process to suit each print. A 360° rotating curing platform powered by 20 × 405nm LEDs plus a gooseneck light delivers a maximum curing power density of 25,000 μW\/cm² at 18 cm irradiation distance for a thorough, even cure. Full-process intelligent monitoring alerts you to open covers, low voltage, blockages, and liquid inflow issues before they become problems. The result is a cleaner, faster, and more controlled post-processing workflow from first wash to finished print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-large 15.1L maximum curing volume accommodates large prints and batch runs from most LCD printers up to 13.6 inches\u003c\/li\u003e\n\u003cli\u003eMaximum wash dimensions of 305 × 165 × 300 mm — compatible with Photon M3 Max, Photon Mono M7 Max, and most mainstream LCD printers\u003c\/li\u003e\n\u003cli\u003eOne-click fully automated washing and curing cycle keeps hands clean and the workflow simple\u003c\/li\u003e\n\u003cli\u003eThree customisable modes: Auto (13–42.5 mins), Wash (10–39.5 mins), and Cure (0.5–30 mins) for flexible post-processing\u003c\/li\u003e\n\u003cli\u003e360° spray cleaning combined with bottom-section immersion for thorough, IPA-efficient cleaning\u003c\/li\u003e\n\u003cli\u003eCuring platform with 20 × 405nm LEDs plus gooseneck light, reaching up to 25,000 μW\/cm² power density at 18 cm\u003c\/li\u003e\n\u003cli\u003eFull-process intelligent monitoring with error alerts for open cover, no liquid inflow, outlet blockage, and low voltage\u003c\/li\u003e\n\u003cli\u003eTransparent flip-open lid and minimalistic touch-button control panel for easy access and operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Curing Volume: 15.1L\u003c\/li\u003e\n\u003cli\u003eMaximum Cleaning Volume: 305*165*300mm\u003c\/li\u003e\n\u003cli\u003eCleaning Method: Alcohol Soaking + Spray Rinse\u003c\/li\u003e\n\u003cli\u003eTime Setting Range: 13-42.5 Mins (Auto mode), 10-39.5 Mins (Wash mode), 0.5-30 Mins (Cure mode)\u003c\/li\u003e\n\u003cli\u003eCleaning Container Capacity: 20L\u003c\/li\u003e\n\u003cli\u003eUV Light Configuration: 20pcs*405nm LEDs + Gooseneck Light\u003c\/li\u003e\n\u003cli\u003ePower Supply: 120W\u003c\/li\u003e\n\u003cli\u003eControl Interface: Touch Buttons\u003c\/li\u003e\n\u003cli\u003eCompatible Printer Models:\n\u003cul\u003e\n\u003cli\u003ePhoton M3 Max\u003c\/li\u003e\n\u003cli\u003ePhoton Mono M7 Max\u003c\/li\u003e\n\u003cli\u003eMost mainstream LCD printers with build volume 13.6 inches or smaller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 43.4 × 43.4 × 55.6 cm\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 13500g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Wash \u0026amp; Cure 3 Max Tray x1\u003c\/li\u003e\n\u003cli\u003eDetergent Drum x1\u003c\/li\u003e\n\u003cli\u003eWaste Liquid Drum x1\u003c\/li\u003e\n\u003cli\u003eClean Liquid Drum x1\u003c\/li\u003e\n\u003cli\u003eWater Tubes x4\u003c\/li\u003e\n\u003cli\u003eWrench Set x1\u003c\/li\u003e\n\u003cli\u003ePower Adapter and Power Cord x1\u003c\/li\u003e\n\u003cli\u003eUser Manual x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449485871,"sku":"WC3MWH0B-O","price":8030.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/WC3MWH0B-O_Anycubic_Wash_and_Cure_3_Max_wr_01.png?v=1787927392"},{"product_id":"anycubic-water-wash-resin-2-0-white","title":"Anycubic Water Wash Resin 2.0 – White","description":"\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row main-content-wrap\"\u003e\n\u003cdiv class=\"main-content col-lg-12\"\u003e\n\u003cdiv id=\"primary\" class=\"content-area\"\u003e\n\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | White finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"product-7160260\" class=\"product type-product post-7160260 status-publish first onbackorder product_cat-coming-soon has-post-thumbnail taxable shipping-taxable purchasable product-type-simple product-layout-full_width\"\u003e\n\u003cdiv class=\"product-summary-wrap\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"summary entry-summary col-lg-6\"\u003e\n\u003cdiv id=\"product-tab\" class=\"woocommerce-tabs woocommerce-tabs-2xmr12wy resp-htabs\"\u003e\n\u003cdiv class=\"resp-tabs-container\"\u003e\n\u003cdiv id=\"tab-description\" class=\"tab-content resp-tab-content resp-tab-content-active\" aria-labelledby=\"tab_item-0\"\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 White is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eWhite colour for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#EFF0F1)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449518639,"sku":"SSX2WH-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2WH-103A_Anycubic-Water-Wash-Resin-2.0-White_wr_01a.jpg?v=1787927396"},{"product_id":"anycubic-water-wash-resin-2-0-translucent-red","title":"Anycubic Water Wash Resin 2.0 – Translucent Red","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Translucent red finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Translucent Red is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent red colour. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eTranslucent red transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent Red (#D22630)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Translucent Red x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449551407,"sku":"SSX2TR-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2TR-103A_Anycubic-Water-Wash-Resin-2.0-Trasnslucent-Red_wr_01a.jpg?v=1787927400"},{"product_id":"anycubic-water-wash-resin-2-0-translucent-green","title":"Anycubic Water Wash Resin 2.0 – Translucent Green","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Translucent green finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Translucent Green is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent green colour. Best printed at an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eTranslucent green transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent Green (#009A17)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Translucent Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449584175,"sku":"SSX2TG-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2TG-103A_Anycubic-Water-Wash-Resin-2.0-Trasnslucent-Green_wr_01a.jpg?v=1787927404"},{"product_id":"anycubic-water-wash-resin-2-0-translucent-blue","title":"Anycubic Water Wash Resin 2.0 – Translucent Blue","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Translucent blue finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Translucent Blue is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent blue colour. Best printed at an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eTranslucent blue transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent Blue (#077CAB)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Translucent Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449616943,"sku":"SSX2TB-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2TB-103A_Anycubic-Water-Wash-Resin-2.0-Trasnslucent-Blue_wr_01a.jpg?v=1787927408"},{"product_id":"anycubic-water-wash-resin-2-0-smoky-black","title":"Anycubic Water Wash Resin 2.0 – Smoky Black","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Smokey Black finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Smoky Black is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent smoky black. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eSmoky black transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Smoky Black (#688197)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Smoky Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449649711,"sku":"SSX2SB-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2SB-103A_Anycubic-Water-Wash-Resin-2.0-Smoky-Black_wr_01a.jpg?v=1787927411"},{"product_id":"anycubic-water-wash-resin-2-0-grey","title":"Anycubic Water Wash Resin 2.0 – Grey","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Grey finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Grey is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eGrey colour for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Grey (#7E93A7)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449682479,"sku":"SSX2GY-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2GY-103A_Anycubic-Water-Wash-Resin-2.0-Grey_wr_01a.jpg?v=1787927415"},{"product_id":"anycubic-water-wash-resin-2-0-clear","title":"Anycubic Water Wash Resin 2.0 - Clear","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Clear finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Clear is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent clear. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eClear transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Clear\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/c㎡\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/c㎡\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 - Clear x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449715247,"sku":"SSX2CL-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2CL-103A_Anycubic_Water_Wash_Resin_20_-_Clear_wr_01.jpg?v=1787927420"},{"product_id":"anycubic-water-wash-resin-2-0-black","title":"Anycubic Water Wash Resin 2.0 – Black","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Black finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eBlack colour for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#212721)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449748015,"sku":"SSX2BK-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2BK-103A_Anycubic-Water-Wash-Resin-2.0-Black_wr_01a.jpg?v=1787927423"},{"product_id":"anycubic-standard-resin-v2-white","title":"Anycubic Standard Resin V2 - White","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in White is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#EFF0F1)\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449780783,"sku":"SBZ2WH-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2WH-105B_Anycubic-Standard-Resin-V2-White_wr_01a.jpg?v=1787927428"},{"product_id":"anycubic-standard-resin-v2-1kg-hd-grey","title":"Anycubic Standard Resin V2 1kg - HD Grey","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for faster, cleaner results | Low-odour formulation | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in HD Grey is a reformulated photopolymer resin designed for makers, hobbyists, and professionals who demand both precision and durability from their LCD\/DLP prints. Its enhanced toughness formula produces models that resist drops and impacts, flex without brittle fracture, and balance strength with ductility — making it well suited to action figures, consumer electronic shells, tooling fixtures, snap-on parts, and load-bearing structural components. A low-viscosity formulation promotes fast bubble dissipation and excellent resin flow, reproducing fine surface details and reducing overall print time. With a 4.3% volumetric shrinkage rate, the resin delivers superior dimensional accuracy and deformation resistance so your models come out true to design. The low-odour formulation keeps the printing environment comfortable, and broad compatibility with all 405nm UV-curing LCD\/DLP printers means it slots into your existing workflow without fuss. Pre-configured profiles are available in Anycubic's Photon Workshop slicer, so you can achieve consistent, high-quality results from the very first print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReformulated for enhanced toughness — models resist impact and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for superior dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for cleaner surface detail and reduced print time\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003ePre-configured Photon Workshop slicer profiles for consistent print success\u003c\/li\u003e\n\u003cli\u003eClean with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: HD Grey\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment:20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 – HD Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449813551,"sku":"SBZ2HG-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2HG-105B_Anycubic_Standard_Resin_V2_1kg_-_HD_Grey_wr_01.jpg?v=1787927433"},{"product_id":"anycubic-standard-resin-v2-clear","title":"Anycubic Standard Resin V2 - Clear","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in Clear is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Clear\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - Clear x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449846319,"sku":"SBZ2CL-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2CL-105B_Anycubic-Standard-Resin-V2-Clear_wr_01a.jpg?v=1787927438"},{"product_id":"anycubic-standard-resin-v2-black","title":"Anycubic Standard Resin V2 - Black","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in Black is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#212721)\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449879087,"sku":"SBZ2BK-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2BK-105B_Anycubic-Standard-Resin-V2-Black_wr_01a.jpg?v=1787927442"},{"product_id":"anycubic-standard-resin-v2-beige","title":"Anycubic Standard Resin V2 - Beige","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in Beige is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Beige (#FCC89B)\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - Beige x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449911855,"sku":"SBZ2BG-105C","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2BG-105C_Anycubic_Standard_Resin_V2_-_Beige_wr_01.jpg?v=1787927448"},{"product_id":"anycubic-photon-p1-3d-printer","title":"Anycubic Photon P1 3D Printer","description":"\u003cp\u003e\u003cstrong\u003e14K resin detail at scale | Industrial-grade Z-axis stability | Automatic levelling | Whisper-quiet under 45 dB | USB, Wi-Fi \u0026amp; Ethernet ready\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAchieve stunning detail with a 10.1-inch 14K LCD screen and 0.02 mm Z-axis accuracy for sharp, smooth prints every time.\u003c\/li\u003e\n\u003cli\u003eEnjoy a generous 223 × 126 × 230 mm build volume — large enough for detailed figurines, technical prototypes, and functional parts.\u003c\/li\u003e\n\u003cli\u003eConnect your way with built-in USB, Wi-Fi, and Ethernet connectivity for flexible file transfer and remote monitoring.\u003c\/li\u003e\n\u003cli\u003eExperience consistent results print after print, thanks to industrial-grade linear guides and a ball screw Z-axis drive.\u003c\/li\u003e\n\u003cli\u003eGet started without the hassle — the automatic levelling system means the Photon P1 is ready to print almost immediately after setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProfessional-Grade Resin Printing for Makers Who Mean Business\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Photon P1 is a high-performance MSLA resin 3D printer designed for makers, designers, and engineers who refuse to compromise on detail. Built around a 10.1-inch 14K LCD screen, an industrial-grade Z-axis drive, and a comprehensive suite of smart features, it delivers the kind of print quality and repeatability usually reserved for professional studios — in a machine built for everyday use.\u003c\/p\u003e\n\u003ch3\u003eSharpness You Can See, Accuracy You Can Measure\u003c\/h3\u003e\n\u003cp\u003eThe 14K resolution LCD panel produces crisp, highly detailed prints with fine surface texture and clean edges. On the Z-axis, a ball screw drive paired with industrial-grade linear guides achieves 0.02 mm accuracy, minimising layer lines and ensuring smooth transitions between layers. Whether you're printing intricate miniatures, precision mechanical components, or architectural scale models, the Photon P1 reproduces your designs faithfully.\u003c\/p\u003e\n\u003ch3\u003eTired of Printers That Need Constant Babysitting?\u003c\/h3\u003e\n\u003cp\u003eThe Photon P1 takes setup frustration off the table with its automatic levelling system, getting you from unboxing to first print with minimal manual intervention. Smart monitoring keeps an eye on key stages of the print process, helping to catch errors early and prevent wasted resin. With quiet operation rated at under 45 dB, you can run the printer comfortably in a home studio, workshop, or office without the noise becoming a nuisance.\u003c\/p\u003e\n\u003ch3\u003eStay Connected, Stay in Control\u003c\/h3\u003e\n\u003cp\u003eFlexibility is built into the Photon P1's connectivity options. Transfer files via USB for straightforward standalone operation, connect over Wi-Fi (2.4 GHz) for wireless convenience, or plug into your network via Ethernet for a stable, wired connection. The printer pairs with Anycubic Photon Workshop slicer software, giving you a familiar, capable environment to prepare and send your models. With a build volume of 223 × 126 × 230 mm and a robust 13.6 kg chassis that stays planted during operation, the Photon P1 is ready for serious, sustained creative work.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10.1-inch 14K LCD screen delivers high-resolution output with fine surface detail and sharp edges.\u003c\/li\u003e\n\u003cli\u003eIndustrial-grade linear guides and ball screw Z-axis drive provide 0.02 mm accuracy and consistent layer-to-layer stability.\u003c\/li\u003e\n\u003cli\u003eAutomatic levelling system eliminates manual calibration — ready to print with minimal setup.\u003c\/li\u003e\n\u003cli\u003eSupports UV resin with adjustable layer thickness from 0.02 mm to 0.15 mm for fine or faster prints.\u003c\/li\u003e\n\u003cli\u003eTri-mode connectivity: USB, Wi-Fi (2.4 GHz), and Ethernet (LAN) for flexible file transfer and control.\u003c\/li\u003e\n\u003cli\u003eWhisper-quiet operation at under 45 dB — suitable for home studios and office environments.\u003c\/li\u003e\n\u003cli\u003eCompatible with Anycubic Photon Workshop slicer software.\u003c\/li\u003e\n\u003cli\u003eBroad power input (100–120 V \/ 200–240 V) for global compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: Resin (LCD\/MSLA)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 223 × 126 × 230 mm\u003c\/li\u003e\n\u003cli\u003ePrint Layer Thickness: 0.02 – 0.15 mm\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: UV Resin\u003c\/li\u003e\n\u003cli\u003eConstruction: Industrial-grade linear guides and ball screw for Z-axis stability\u003c\/li\u003e\n\u003cli\u003eMotion System Z-axis: Ball screw with industrial-grade linear guides, 0.02 mm accuracy\u003c\/li\u003e\n\u003cli\u003eAuto-Leveling: Yes – automatic levelling system\u003c\/li\u003e\n\u003cli\u003eControl and Print Methods: USB, Wi-Fi, Ethernet\/LAN\u003c\/li\u003e\n\u003cli\u003eTouchscreen: 10.1\" 14K screen\u003c\/li\u003e\n\u003cli\u003eNoise Level: Under 45 dB\u003c\/li\u003e\n\u003cli\u003eSlicer Software: Anycubic Photon Workshop\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB, Wi-Fi (WLAN), LAN (Ethernet)\u003c\/li\u003e\n\u003cli\u003eWi-Fi Spec: 2.4 GHz (2.400–2.4835 GHz)\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 366 × 338 × 539 mm\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 13.6 kg\u003c\/li\u003e\n\u003cli\u003ePower Input: 100–120 V \/ 200–240 V\u003c\/li\u003e\n\u003cli\u003eRated Power: 215 W\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Photon P1 3D Printer x1\u003c\/li\u003e\n\u003cli\u003eBuild platform x1\u003c\/li\u003e\n\u003cli\u003eResin tray x1\u003c\/li\u003e\n\u003cli\u003eResin funnel x1\u003c\/li\u003e\n\u003cli\u003eScraper x2\u003c\/li\u003e\n\u003cli\u003eSet of Allen wrenches x1\u003c\/li\u003e\n\u003cli\u003eWet wipes x1\u003c\/li\u003e\n\u003cli\u003eProtective accessories x1\u003c\/li\u003e\n\u003cli\u003eUSB flash drive x1\u003c\/li\u003e\n\u003cli\u003ePower cord x1\u003c\/li\u003e\n\u003cli\u003eUser manual x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449944623,"sku":"PP10BK0A-O","price":16140.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/PP10BK0A-O_Anycubic_Photon_P1_3D_Printer_wr_01.jpg?v=1787927453"},{"product_id":"anycubic-photon-mono-m7-pro-10-1-14k-resin-3d-printer","title":"Anycubic Photon Mono M7 Pro 10.1\" 14K Resin 3D Printer","description":"\u003ch2\u003e\u003cem\u003eBring your finest ideas to life in breathtaking detail.\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Anycubic Photon Mono M7 Pro is a next-generation resin 3D printer built for makers who refuse to compromise on quality. At its heart sits a crisp 10.1-inch 14K monochrome LCD, resolving fine features down to a razor-sharp 16.8µm on the X\/Y axis - so every miniature, prototype and precision part comes off the plate looking exactly as you imagined it.\u003c\/p\u003e\n\u003cp\u003eSpeed keeps pace with the detail. Paired with High-Speed Resin, the M7 Pro reaches printing speeds of up to 170mm\/h, turning what used to be an overnight wait into a same-session result. And thanks to Auto-Adaptive Technology with dynamic temperature control, the printer keeps your resin in its ideal working range for consistent, repeatable prints - batch after batch.\u003c\/p\u003e\n\u003cp\u003eIt's designed to work smarter, not harder. Auto Resin Refill and Withdrawal tops up the vat and draws resin back automatically, so longer prints run unattended without the mess or the guesswork. A generous 223 × 126 × 230mm (6.5L) build volume gives you room for large single models or a full plate of miniatures, while a laser-engraved build plate, dual linear Z-axis rails with 10µm precision and a leveling-free design mean strong adhesion and reliable results straight out of the box.\u003c\/p\u003e\n\u003cp\u003eVersatile by nature, the M7 Pro handles high-speed, water-washable, standard, ABS-like and plant-based resins, and connects your way over USB, Wi-Fi or LAN. With Photon Workshop and Chitubox support, a responsive 4.3-inch touchscreen and full Anycubic App integration, it's a resin 3D printer that fits effortlessly into your workflow - whether you're a hobbyist, a tabletop enthusiast or a professional chasing production-grade accuracy.\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Photon Mono M7 Pro - precision, speed and effortless printing, ready for whatever you create next.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10.1-inch 14K mono LCD screen for high-resolution resin printing\u003c\/li\u003e\n\u003cli\u003e170mm\/h with High-speed Resin\u003c\/li\u003e\n\u003cli\u003eDesigned for detailed miniatures, prototypes, and precision parts\u003c\/li\u003e\n\u003cli\u003eAuto-Adaptive Technology Control Heating\u003c\/li\u003e\n\u003cli\u003eAuto Resin Refill, Withdrawal\u003c\/li\u003e\n\u003cli\u003eResin-based photopolymer printing process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting Volume: 223 x 126 x 230mm³ (6.5L)\u003c\/li\u003e\n\u003cli\u003ePrinting Speed: Max Speed ≤130mm\/h; Standard Resin (0.1mm): ≤130mm\/h; High-Speed Resin (0.1mm): ≤170mm\/h\u003c\/li\u003e\n\u003cli\u003eLayer Height Range: 0.01 – 0.15mm\u003c\/li\u003e\n\u003cli\u003eX\/Y Axis Resolution: 16.8 × 24.8μm\u003c\/li\u003e\n\u003cli\u003eLight Source: COB Light Source+ Fresnel lens + Light Uniformity Algorithm\u003c\/li\u003e\n\u003cli\u003eLight Intensity: 5500 ±10% μW\/cm²\u003c\/li\u003e\n\u003cli\u003eMaterial Compatibility: High-speed, Water-washable, Standard, ABS-like, and Plant-based Resins, etc\u003c\/li\u003e\n\u003cli\u003eBuild Platform: Laser-engraved Build Plate\u003c\/li\u003e\n\u003cli\u003eZ-axis: Dual Linear Rails with 10 μm Precision\u003c\/li\u003e\n\u003cli\u003eRelease film: Improved ACF Film\u003c\/li\u003e\n\u003cli\u003eResin Vat: ≤1L\u003c\/li\u003e\n\u003cli\u003eMachine Leveling: Leveling-free\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: Not Supported\u003c\/li\u003e\n\u003cli\u003ePower Supply: 240W\u003c\/li\u003e\n\u003cli\u003eProtection Film: Replaceable Scratch-resistant Film\u003c\/li\u003e\n\u003cli\u003eResin Auto-fill Unit: Supported\u003c\/li\u003e\n\u003cli\u003eDynamic Temperature Control Resin Vat: Supported\u003c\/li\u003e\n\u003cli\u003eSlicing Software: Photon Workshop, Chitubox, Lychee Slicer (Scheduled)\u003c\/li\u003e\n\u003cli\u003eFile Transfer: USB\/Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003eHinged Cover: -\u003c\/li\u003e\n\u003cli\u003eOperating Screen: 4.3\" Touch-Control\u003c\/li\u003e\n\u003cli\u003eAir Purifier: Optional Accessory\u003c\/li\u003e\n\u003cli\u003eLCD Screen: 10.1-inch Monochrome LCD, 14K Resolution\u003c\/li\u003e\n\u003cli\u003eAnycubic App: Supported\u003c\/li\u003e\n\u003cli\u003eMultilingual Support: EN \/ CN \/ DE \/ FR \/ IT \/ ES \/ RU \/ JP\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 12 800g\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 312 x 315 x 520mm³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Photon Mono M7 Pro 10.1\" 14K Resin 3D Printer x1\u003c\/li\u003e\n\u003cli\u003ePrint Platform x1\u003c\/li\u003e\n\u003cli\u003eResin Vat x1\u003c\/li\u003e\n\u003cli\u003eWi-Fi Antenna x1\u003c\/li\u003e\n\u003cli\u003eHex Key Set x1\u003c\/li\u003e\n\u003cli\u003eProtective Equipment x1\u003c\/li\u003e\n\u003cli\u003eFilter x5\u003c\/li\u003e\n\u003cli\u003eScrapers x2\u003c\/li\u003e\n\u003cli\u003eLeveling Paper x1\u003c\/li\u003e\n\u003cli\u003eUSB Drive x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eScreen Protector Kit x1\u003c\/li\u003e\n\u003cli\u003eAuto-fill Unit x1\u003c\/li\u003e\n\u003cli\u003eUser Manual x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449977391,"sku":"PM7RBK0C-O","price":13690.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/PM7RBK0C-O_Anycubic-Photon-Mono-M7-Pro-10.1-inch-14K-Resin-3D-Printer_wr_01a.jpg?v=1787927456"},{"product_id":"anycubic-photon-mono-4-resin-3d-printer","title":"Anycubic PHOTON Mono 4 Resin 3D Printer","description":"\u003cp\u003e\u003cstrong\u003e10K resin detail at an accessible price | Print speeds up to 70mm\/h | 7\" HD touchscreen control | Power-loss resume keeps your prints safe | MSLA LCD technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Photon Mono 4 is an MSLA resin 3D printer designed for makers, hobbyists, and creators who want high-detail output without stepping up to a premium price. It prints at a layer thickness of just 0.02mm, capturing fine surface detail that filament-based printers simply cannot match, while a maximum printing speed of 70mm\/h keeps your projects moving along at a respectable pace. The 7\" high-definition touchscreen makes navigating settings and monitoring jobs straightforward, reducing the learning curve for those new to resin printing. Power-loss resume means an unexpected outage won't cost you a completed print — the Photon Mono 4 picks up right where it left off. A capable, practical entry point into precision resin printing backed by a 12-month warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMSLA (LCD resin) printing technology for high-precision results\u003c\/li\u003e\n\u003cli\u003e0.02mm minimum layer thickness for fine surface detail\u003c\/li\u003e\n\u003cli\u003ePrint speeds up to 70mm\/h to reduce wait times\u003c\/li\u003e\n\u003cli\u003e7\" high-definition touchscreen for intuitive control\u003c\/li\u003e\n\u003cli\u003ePower-loss resume — automatically continues printing after a power interruption\u003c\/li\u003e\n\u003cli\u003eCompatible with UV resin consumables\u003c\/li\u003e\n\u003cli\u003e12-month manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: MSLA (Resin \/ LCD)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 153.4 x 87 x 165mm³\u003c\/li\u003e\n\u003cli\u003ePrint Layer Thickness: 0.02mm\u003c\/li\u003e\n\u003cli\u003eMax Printing Speed: 70mm\/h\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: UV Resin\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: true\u003c\/li\u003e\n\u003cli\u003eTouchscreen: 7\" High-Definition Screen\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PHOTON Mono 4 Resin 3D Printer x1\u003c\/li\u003e\n\u003cli\u003ePrint Platform x1\u003c\/li\u003e\n\u003cli\u003eResin Vat x1\u003c\/li\u003e\n\u003cli\u003eFilter x2\u003c\/li\u003e\n\u003cli\u003eScrapers x2\u003c\/li\u003e\n\u003cli\u003eHex Keys x3\u003c\/li\u003e\n\u003cli\u003eUSB Drive x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eManual x1\u003c\/li\u003e\n\u003cli\u003eScreen Protector Kit x1\u003c\/li\u003e\n\u003cli\u003eLeveling Paper x1\u003c\/li\u003e\n\u003cli\u003eProtective Equipment x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450010159,"sku":"PM40BK0A-O","price":5190.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/PM40BK0A-O_ANYCUBIC_PHOTON_MONO_4_wr_01.jpg?v=1787927461"},{"product_id":"anycubic-kobra-s1-max-combo-3d-printer","title":"Anycubic Kobra S1 Max Combo - 3D Printer","description":"\u003cp\u003e\u003cstrong\u003eLarge-format multicolour 3D printing | Fully-enclosed CoreXY precision | Up to 16-colour output | Engineering-grade filament support | 350×350×350mm³ build volume\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint large-scale models with a generous 350×350×350mm³ build volume — ideal for ambitious, full-sized creations\u003c\/li\u003e\n\u003cli\u003eAchieve vivid multicolour results with up to 16-colour printing capability via ACE 2 Pro units\u003c\/li\u003e\n\u003cli\u003eExperience consistent, reliable prints inside a fully-enclosed CoreXY structure built for precision and stability\u003c\/li\u003e\n\u003cli\u003ePush material boundaries with a 350°C hardened steel nozzle compatible with engineering-grade and composite filaments\u003c\/li\u003e\n\u003cli\u003eEnjoy broad filament compatibility across PLA, PETG, ASA, ABS, TPU, PLA-CF, PETG-CF, and PLA Silk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLarge-Format 3D Printing, Unleashed in Full Colour\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Kobra S1 Max Combo is built for makers, designers, and engineers who refuse to be limited — by size, by colour, or by material. Combining a fully-enclosed CoreXY printer with the ACE 2 Pro automatic colour-exchange system, this combo delivers a 350×350×350mm³ build volume alongside the capability to print in up to 16 colours in a single run. Whether you're producing functional prototypes, detailed display models, or large creative projects, the Kobra S1 Max Combo gives you the tools to do it at scale.\u003c\/p\u003e\n\u003ch3\u003eA Build Volume That Matches Your Ambitions\u003c\/h3\u003e\n\u003cp\u003eTired of splitting large models into multiple prints just to fit your build plate? The Kobra S1 Max Combo's 350×350×350mm³ print volume means you can take on full-scale functional parts, oversized figurines, architectural models, and more — all in a single print session. The fully-enclosed CoreXY construction keeps the motion system rigid and precise across that entire volume, so dimensional accuracy doesn't suffer as your prints grow larger.\u003c\/p\u003e\n\u003ch3\u003eUp to 16 Colours, Automatically Managed\u003c\/h3\u003e\n\u003cp\u003eThe ACE 2 Pro automatic colour exchange units included in this combo take multicolour FDM printing to a new level. With the right configuration of ACE 2 Pro units, the system supports up to 16-colour printing — letting you produce richly detailed, vibrant models without manual filament swaps. The result is creative output that genuinely reflects your designs rather than being constrained by single-material limitations.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Demanding Filaments\u003c\/h3\u003e\n\u003cp\u003eThe Kobra S1 Max Combo's hardened steel nozzle handles far more than standard PLA. With a maximum nozzle temperature of 350°C, you can print carbon-fibre composites such as PLA-CF and PETG-CF, flexible TPU, weather-resistant ASA, and tough ABS with confidence. The fully-enclosed chamber supports the stable thermal environment that engineering-grade and composite materials demand, giving you consistent results across a wide range of applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e350×350×350mm³ build volume for large-scale and full-sized prints\u003c\/li\u003e\n\u003cli\u003eUp to 16-colour printing capability with ACE 2 Pro units\u003c\/li\u003e\n\u003cli\u003eFully-enclosed CoreXY construction for rigidity and dimensional precision\u003c\/li\u003e\n\u003cli\u003e350°C hardened steel nozzle supports composite and engineering-grade filaments\u003c\/li\u003e\n\u003cli\u003eActive chamber heating at 65°C for consistent print environment\u003c\/li\u003e\n\u003cli\u003eCompatible with PLA, PETG, ASA, ABS, TPU, PLA-CF, PETG-CF, and PLA Silk\u003c\/li\u003e\n\u003cli\u003eFDM (Fused Deposition Modelling) printing technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Anycubic\u003c\/li\u003e\n\u003cli\u003eProduct Name: Anycubic Kobra S1 Max Combo\u003c\/li\u003e\n\u003cli\u003eModel Number: Kobra S1 Max Combo\u003c\/li\u003e\n\u003cli\u003eManufacturer: Anycubic\u003c\/li\u003e\n\u003cli\u003eSKU \/ Part Number: KSMCBK0B-O\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modelling)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 350×350×350mm³\u003c\/li\u003e\n\u003cli\u003eMulticolour Printing: Up to 16-colour printing (with ACE 2 Pro units)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PLA, PETG, ASA, ABS, TPU, PLA-CF, PETG-CF, PLA Silk\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened Steel\u003c\/li\u003e\n\u003cli\u003eMax Nozzle Temperature: 350°C\u003c\/li\u003e\n\u003cli\u003eConstruction: Fully-Enclosed CoreXY\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Kobra S1 Max – Black x1\u003c\/li\u003e\n\u003cli\u003eAnycubic ACE 2 Pro x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder x1\u003c\/li\u003e\n\u003cli\u003eSignal Cable x1\u003c\/li\u003e\n\u003cli\u003eTeflon Tubes x4\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eReturn Detection Module x1\u003c\/li\u003e\n\u003cli\u003eM4 Screws x2\u003c\/li\u003e\n\u003cli\u003eM2.5 Screws x2\u003c\/li\u003e\n\u003cli\u003eCable Clip x2\u003c\/li\u003e\n\u003cli\u003eAllen Key x3\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaner x1\u003c\/li\u003e\n\u003cli\u003eGrease x1\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaning Module x1\u003c\/li\u003e\n\u003cli\u003eNozzle Parking Pad x1\u003c\/li\u003e\n\u003cli\u003eActivated Carbon Pack x1\u003c\/li\u003e\n\u003cli\u003eFilament Samples x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder Assembly x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Anycubic\u003c\/h3\u003e\n\u003cp\u003eAnycubic has built its reputation on making professional-grade 3D printing accessible — combining hardware innovation with practical usability. From hobbyists to professional designers, Anycubic's Kobra series brings large-format, multicolour FDM printing within reach, backed by a global support network and a commitment to continuous improvement.\u003c\/p\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450042927,"sku":"KSMCBK0B-O","price":23460.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/KSMCBK0B-O_Anycubic_Kobra_S1_Max_Combo_-_Black_wr_01-1.jpg?v=1787927465"},{"product_id":"anycubic-kobra-s1-ace-2-pro-combo-3d-printer","title":"Anycubic Kobra S1 Ace 2 Pro Combo 3D Printer","description":"\u003cp\u003e\u003cstrong\u003e16-colour multicolour FDM printing | Up to 600mm\/s CoreXY speed | Fully enclosed with active filament drying | AI print monitoring | App and cloud control\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint up to 16 colours simultaneously with the included ACE 2 Pro multi-material unit, expandable from a base of 4 colours\u003c\/li\u003e\n\u003cli\u003eAchieve blazing print speeds of up to 600mm\/s on a rigid CoreXY motion system with 20000mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003eEnjoy a generous 250mm × 250mm × 250mm build volume with fully automatic levelling — no Z-axis compensation needed\u003c\/li\u003e\n\u003cli\u003ePrint with confidence using built-in AI spaghetti detection, filament runout sensing, and power-loss resume\u003c\/li\u003e\n\u003cli\u003eControl and monitor your prints from anywhere via the Anycubic App, AC Cloud, or the 4.3-inch capacitive touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSerious multicolour printing, straight out of the box\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Kobra S1 ACE 2 Pro Combo 3D printer is a fully enclosed CoreXY 3D printer bundled with the ACE 2 Pro multi-material unit, giving makers, hobbyists, and design professionals a complete system for producing vivid multicolour prints from day one. With a base capacity of 4 colours — expandable to 16 — and a 250mm × 250mm × 250mm build volume, it is built for anyone who wants more than a single-colour machine without building a separate setup from scratch.\u003c\/p\u003e\n\u003ch3\u003eSpeed and precision that keeps up with your creativity\u003c\/h3\u003e\n\u003cp\u003eThe Kobra S1 uses a CoreXY construction paired with light-rail X and Y axes, a dual-gear short-range extruder, and a maximum print speed of 600mm\/s at up to 20000mm\/s² acceleration. Layer thickness runs from 0.08mm to 0.28mm, giving you fine detail when you need it and fast rough drafts when you do not. The standard 0.4mm brass nozzle is quick-detachable and compatible with 0.2mm, 0.6mm, and 0.8mm alternatives, while the hotend reaches up to 320°C and the heated bed reaches up to 120°C — covering PLA, PETG, ABS, ASA, and TPU with ease.\u003c\/p\u003e\n\u003ch3\u003eTired of failed prints ruining your filament and your day?\u003c\/h3\u003e\n\u003cp\u003eThe Kobra S1 ACE 2 Pro Combo 3D printer addresses the most common printing frustrations with a suite of intelligent safeguards. AI spaghetti detection monitors the chamber camera feed and can skip over problem areas before they ruin an entire job. Automatic filament detection and auto-resume handle runouts without manual intervention, and power-loss recovery picks up exactly where it left off after an unexpected outage. Fully automatic levelling with object-skip and area levelling means the printer arrives ready to print — no manual Z-axis compensation required.\u003c\/p\u003e\n\u003ch3\u003eKeep filament dry and prints in perfect condition\u003c\/h3\u003e\n\u003cp\u003eThe ACE 2 Pro unit is more than a multi-material hub — it actively dries your filament during printing at temperatures up to 65°C, helping to prevent moisture-related print defects. A built-in temperature and humidity sensor monitors conditions inside the unit, while a solenoid valve expels moist air during the drying cycle. The enclosed chamber on the Kobra S1 itself houses an activated carbon air filtration system, keeping your workspace clean when printing with materials like ABS and ASA.\u003c\/p\u003e\n\u003ch3\u003eFull control, wherever you are\u003c\/h3\u003e\n\u003cp\u003eManage every aspect of your print from the 4.3-inch capacitive touchscreen on the machine, or connect over 2.4GHz Wi-Fi to use the Anycubic App, Anycubic Slicer Next, or AC Cloud for remote monitoring and control. A built-in chamber camera supports time-lapse photography so you can review print progress at a glance. The printer runs on Kobra OS, supports multilingual setup from first boot, and is compatible with both Anycubic Slicer Next and OrcaSlicer. Quiet mode keeps noise at or below 44dB — considerate for home studios and shared workspaces.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoreXY construction with light-rail X and Y axes delivers fast, accurate motion up to 600mm\/s and 20000mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003eACE 2 Pro multi-material unit included — supports 4 colours as standard, expandable to 16 colours\u003c\/li\u003e\n\u003cli\u003eActive filament drying in the ACE 2 Pro unit up to 65°C, with integrated temperature and humidity sensing\u003c\/li\u003e\n\u003cli\u003eFully automatic levelling with object-skip and area levelling — no manual Z-axis compensation required\u003c\/li\u003e\n\u003cli\u003eAI spaghetti detection via chamber camera with time-lapse photography support\u003c\/li\u003e\n\u003cli\u003eFilament runout detection with auto-resume, plus power-loss recovery\u003c\/li\u003e\n\u003cli\u003eQuick-detachable 0.4mm brass nozzle; compatible with 0.2mm, 0.6mm, and 0.8mm nozzles\u003c\/li\u003e\n\u003cli\u003eQuiet mode operation at ≤44dB; standard mode at ≤46dB\u003c\/li\u003e\n\u003cli\u003eActivated carbon air filtration built into the enclosed chamber\u003c\/li\u003e\n\u003cli\u003eCompatible with PLA, TPU (ACE-grade), PETG, ABS, and ASA filaments\u003c\/li\u003e\n\u003cli\u003eControl via touchscreen, Anycubic App, Anycubic Slicer Next, AC Cloud, or USB drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 250mm × 250mm × 250mm\u003c\/li\u003e\n\u003cli\u003ePrint Layer Thickness: 0.08 - 0.28mm\u003c\/li\u003e\n\u003cli\u003eMax Printing Speed: 600mm\/s\u003c\/li\u003e\n\u003cli\u003eAcceleration: 20000mm\/s²\u003c\/li\u003e\n\u003cli\u003eMulticolor Printing: Base 4 colors, expandable to 16 colors\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PLA,TPU,PETG,ABS,ASA\u003c\/li\u003e\n\u003cli\u003eActive Drying: Supported, drying temperature up to 65°C\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: Standard 0.4mm; supports 0.2\/0.6\/0.8mm expansion\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Non-all-metal, brass nozzle, quick-detachable\u003c\/li\u003e\n\u003cli\u003eMax Nozzle Temperature: 320°C\u003c\/li\u003e\n\u003cli\u003eHotbed Max Temperature: 120°C\u003c\/li\u003e\n\u003cli\u003eFirmware: Kobra OS\u003c\/li\u003e\n\u003cli\u003eConstruction: CoreXY\u003c\/li\u003e\n\u003cli\u003eExtrusion Type: Dual gear short-range extrusion\u003c\/li\u003e\n\u003cli\u003eMotion System X-axis: Light rail\u003c\/li\u003e\n\u003cli\u003eMotion System Y-axis: Light rail\u003c\/li\u003e\n\u003cli\u003eMotion System Z-axis: Single motor with three guide poles\u003c\/li\u003e\n\u003cli\u003eAuto-Leveling: Fully automatic leveling, no need for Z-axis compensation\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: true\u003c\/li\u003e\n\u003cli\u003eFilament Detection and Auto Resume: true\u003c\/li\u003e\n\u003cli\u003eAI Spaghetti Detection: true\u003c\/li\u003e\n\u003cli\u003eObject-Skip and Area Leveling: true\u003c\/li\u003e\n\u003cli\u003eControl and Print Methods: Touchscreen, Anycubic App, Anycubic Slicer Next, AC Cloud\u003c\/li\u003e\n\u003cli\u003eTouchscreen: 4.3-\" capacitive touch screen\u003c\/li\u003e\n\u003cli\u003eNoise Level: ≤46dB (Standard mode); ≤44dB (Quiet mode)\u003c\/li\u003e\n\u003cli\u003eVideo Monitoring: Chamber Camera (supported; time-lapse photography supported)\u003c\/li\u003e\n\u003cli\u003eMultilingual Support: Yes (multiple languages available at startup)\u003c\/li\u003e\n\u003cli\u003eSlicer Software: Anycubic Slicer Next, OrcaSlicer\u003c\/li\u003e\n\u003cli\u003eInput File Formats: .STL,.OBJ,.3mf\u003c\/li\u003e\n\u003cli\u003eOutput File Formats: GCode\u003c\/li\u003e\n\u003cli\u003eConnectivity: U-DISK,AC Cloud, Anycubic Slicer Next, Wi-Fi\u003c\/li\u003e\n\u003cli\u003eWi-Fi Spec: 2.4GHz, Working Mode: STA\u003c\/li\u003e\n\u003cli\u003ePower Input: 100-120V~ \/ 200-240V~\u003c\/li\u003e\n\u003cli\u003eRated Power: 500W \/ 1500W\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 40 × 41 × 49 cm\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 18000g\u003c\/li\u003e\n\u003cli\u003eACE Unit Dimensions: 36.8 × 29.1 × 23.6 cm\u003c\/li\u003e\n\u003cli\u003eACE Unit Weight: 3700g\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKobra S1 Printer x1\u003c\/li\u003e\n\u003cli\u003eACE 2 Pro x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder x1\u003c\/li\u003e\n\u003cli\u003eSignal Cable x1\u003c\/li\u003e\n\u003cli\u003eFilament Tube x4\u003c\/li\u003e\n\u003cli\u003eScrews M3×6 x2\u003c\/li\u003e\n\u003cli\u003eScrews M2.5×25 x2\u003c\/li\u003e\n\u003cli\u003eGrease x1\u003c\/li\u003e\n\u003cli\u003eHex Keys 2.5mm \/ 2.0mm \/ 1.5mm x1 set\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaner x1\u003c\/li\u003e\n\u003cli\u003eFilament Sample x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x2\u003c\/li\u003e\n\u003cli\u003eActivated Carbon x1\u003c\/li\u003e\n\u003cli\u003eAnti-blocking Module x1\u003c\/li\u003e\n\u003cli\u003eNozzle Silicone Part x1\u003c\/li\u003e\n\u003cli\u003eCable Organizer x2\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaning Module x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Anycubic\u003c\/h3\u003e\n\u003cp\u003eAnycubic has been at the forefront of accessible 3D printing since 2015, combining engineering precision with a commitment to making advanced fabrication technology available to everyone — from first-time hobbyists to experienced makers. The Kobra S1 ACE 2 Pro Combo is a direct expression of that mission: a fully capable multicolour FDM system built to perform reliably and grow with your ambitions.\u003c\/p\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450075695,"sku":"KS2CBK0A-O","price":14180.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/KS2CBK0A-O_Anycubic_Kobra_S1_Ace_2_Pro_Combo_3D_Pri_wr_01.png?v=1787927471"},{"product_id":"anycubic-kobra-s1-max-3d-printer","title":"Anycubic Kobra S1 MAX 3D Printer","description":"\u003cp\u003e\u003cstrong\u003eLarge-format CoreXY speed | Engineering-grade filament support | AI-powered print monitoring | Fully automatic bed levelling\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint at speeds up to 600 mm\/s across a generous 350 × 350 × 350 mm build volume — tackle large, complex projects with confidence.\u003c\/li\u003e\n\u003cli\u003eAchieve precise, repeatable results every time with LeviQ3.0 automatic bed levelling and built-in pressure advance and flow calibration.\u003c\/li\u003e\n\u003cli\u003ePrint with over a dozen filament types — from everyday PLA and PETG to engineering-grade PA, PC, and carbon-fibre composites — thanks to a 350°C hardened steel nozzle.\u003c\/li\u003e\n\u003cli\u003eStay in control from anywhere: monitor, manage, and start prints via the Anycubic App, slicing software, or the onboard 4.3-inch capacitive touchscreen.\u003c\/li\u003e\n\u003cli\u003eWork quietly and confidently — AI spaghetti detection, filament entanglement sensing, and power-loss resume keep long prints on track without constant babysitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBig builds, serious speeds — without the compromise\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Kobra S1 Max 3D Printer is built for makers, engineers, and creators who need a large-format FDM 3D printer that can keep up with ambition. With a 350 × 350 × 350 mm³ build volume and a CoreXY motion system capable of reaching 600 mm\/s (recommended 300 mm\/s) at accelerations up to 20,000 mm\/s², it handles everything from rapid prototyping to production-scale batch runs — without sacrificing print quality.\u003c\/p\u003e\n\u003ch3\u003ePrint more materials, solve harder problems\u003c\/h3\u003e\n\u003cp\u003eTired of a 3D printer that locks you into a handful of basic filaments? The Kobra S1 Max supports thirteen filament types, spanning everyday PLA and PETG all the way to demanding engineering materials like PA, PC, PA6-CF, PC-CF\/GF, and PET-CF. A hardened steel nozzle rated to 350°C and hardened steel extrusion gears handle abrasive carbon-fibre and glass-fibre composites without wearing down, while a PEI spring steel build plate (max 120°C) gives prints solid adhesion and easy release.\u003c\/p\u003e\n\u003ch3\u003eSet it up once, print with confidence every time\u003c\/h3\u003e\n\u003cp\u003eGetting the first layer right shouldn't take an hour of fiddling. The Kobra S1 Max integrates LeviQ3.0 automatic bed levelling alongside object-skip and area levelling, so the printer compensates for any surface variation before a single line of filament is laid down. Pressure advance and flow calibration fine-tune extrusion in real time, keeping walls clean and corners sharp across the full build volume.\u003c\/p\u003e\n\u003ch3\u003eAI monitoring that keeps long prints on track\u003c\/h3\u003e\n\u003cp\u003eUnattended overnight prints carry real risk — but the Kobra S1 Max watches over your work so you don't have to. An onboard AI spaghetti detection system flags failed prints before they waste hours of filament. Filament runout detection, filament entanglement detection, and automatic resume mean a snapped or tangled spool won't ruin a job. Power-loss resume picks up exactly where the printer left off if the power cuts out, and the standard HD camera (720P) lets you check in remotely via the Anycubic App.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoreXY motion system with linear rods on all three axes — speeds up to 600 mm\/s with 20,000 mm\/s² maximum acceleration.\u003c\/li\u003e\n\u003cli\u003e350 × 350 × 350 mm³ build volume for large-format and batch printing.\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle (standard 0.4 mm, expandable to 0.25 \/ 0.6 \/ 0.8 mm) rated to 350°C — compatible with abrasive filaments.\u003c\/li\u003e\n\u003cli\u003eSupports 13 filament types: PLA, PETG, PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA, PA6-CF, PC-CF\/GF, PET-CF.\u003c\/li\u003e\n\u003cli\u003eLeviQ3.0 auto-levelling with object-skip, area levelling, pressure advance, and flow calibration for reliable first layers.\u003c\/li\u003e\n\u003cli\u003eAI spaghetti detection, filament runout detection, filament entanglement detection, and power-loss resume for unattended printing peace of mind.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 720P HD camera for remote monitoring via the Anycubic App.\u003c\/li\u003e\n\u003cli\u003e4.3-inch capacitive touchscreen with Kobra OS; 10 language interfaces supported.\u003c\/li\u003e\n\u003cli\u003eQuiet operation at ≤45 dB in quiet mode; ≤48 dB in standard mode.\u003c\/li\u003e\n\u003cli\u003ePEI spring steel build plate with hotbed temperature up to 120°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Anycubic\u003c\/li\u003e\n\u003cli\u003eProduct Name: Anycubic Kobra S1 Max\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modelling)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 350 x 350 x 350mm³\u003c\/li\u003e\n\u003cli\u003eMax Printing Speed: Recommended 300 mm\/s; Maximum 600 mm\/s\u003c\/li\u003e\n\u003cli\u003eAcceleration: Recommended 10,000 mm\/s²; Maximum 20,000 mm\/s²\u003c\/li\u003e\n\u003cli\u003eMulticolour Printing: Sold separately\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PLA, PETG, PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA,  PA6-CF,PC-CF\/GF, PET-CF\u003c\/li\u003e\n\u003cli\u003eActive Drying: Not Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: Standard 0.4 mm, Expandable to 0.25 \/ 0.6 \/ 0.8 mm\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened Steel\u003c\/li\u003e\n\u003cli\u003eMax Nozzle Temperature: 350°C\u003c\/li\u003e\n\u003cli\u003eHotbed Max Temperature: 120°C\u003c\/li\u003e\n\u003cli\u003eHotbed Material: PEI Spring Steel Build Plate\u003c\/li\u003e\n\u003cli\u003eFirmware: Kobra OS\u003c\/li\u003e\n\u003cli\u003eConstruction: CoreXY\u003c\/li\u003e\n\u003cli\u003eExtrusion Type: Short Distance Extrusion, Hardened Steel Extrusion Gears\u003c\/li\u003e\n\u003cli\u003eMotion System X-axis: Linear Rods\u003c\/li\u003e\n\u003cli\u003eMotion System Y-axis: Linear Rods\u003c\/li\u003e\n\u003cli\u003eMotion System Z-axis: Single Motor, Triple Lead Screws, Triple Linear Rods\u003c\/li\u003e\n\u003cli\u003eAuto-Leveling: LeviQ3.0 Auto-levelling\u003c\/li\u003e\n\u003cli\u003ePressure Advance \/ Flow Calibration: True\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: True\u003c\/li\u003e\n\u003cli\u003eFilament Detection and Auto Resume: True\u003c\/li\u003e\n\u003cli\u003eFilament Entanglement Detection: True\u003c\/li\u003e\n\u003cli\u003eAI Spaghetti Detection: True\u003c\/li\u003e\n\u003cli\u003eObject-Skip and Area Levelling: True\u003c\/li\u003e\n\u003cli\u003eControl and Print Methods: Via Printer, Slicing Software, Anycubic APP, U Disk\u003c\/li\u003e\n\u003cli\u003eTouchscreen: 4.3\" Capacitive Touchscreen\u003c\/li\u003e\n\u003cli\u003eNoise Level: ≤48dB (Standard mode); ≤45dB (Quiet mode)\u003c\/li\u003e\n\u003cli\u003eVideo Monitoring: Standard HD Camera, Supports 720P\u003c\/li\u003e\n\u003cli\u003eMultilingual Support: EN \/ CN \/ DE \/ FR \/ IT \/ ES \/ RU \/ JP \/ KO \/ PT\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 502.7 × 483 × 584 mm³\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 25.7 kg\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 31 kg\u003c\/li\u003e\n\u003cli\u003ePackaging Dimensions: 583 × 560 × 693 mm³\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Kobra S1 Max 3D Printer x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder Assembly x1\u003c\/li\u003e\n\u003cli\u003eM4×16 Screws x2\u003c\/li\u003e\n\u003cli\u003eGrease x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eHex Keys (2.5 \/ 2.0 \/ 1.5 mm) x1 set\u003c\/li\u003e\n\u003cli\u003eFilament Samples x1\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaner x1\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaning Module x1\u003c\/li\u003e\n\u003cli\u003eNozzle Parking Pad x1\u003c\/li\u003e\n\u003cli\u003e0.6 mm Hardened Steel Nozzle x1\u003c\/li\u003e\n\u003cli\u003eActivated Carbon Pack x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450108463,"sku":"KS1MBK0B-O","price":18570.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/KS1MBK0B-O_Anycubic-Kobra-S1-MAX-3D-Printer_wr_01b.jpg?v=1787927476"},{"product_id":"anycubic-kobra-s1-filament-3d-printer","title":"Anycubic Kobra S1 FDM 3D Printer","description":"\u003cp\u003e\u003cstrong\u003eFully enclosed CoreXY speed | 250×250×250mm build volume | 320°C hotend | AI print monitoring | Ultra-quiet 44dB operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint large, detailed models with a generous 250×250×250mm build volume inside a fully enclosed CoreXY chamber.\u003c\/li\u003e\n\u003cli\u003eAchieve fast, precise results with a recommended print speed of 300 mm\/s and acceleration up to 10,000 mm\/s².\u003c\/li\u003e\n\u003cli\u003eEnjoy ultra-quiet operation at as low as 44dB in Quiet mode — print overnight without disturbing the household.\u003c\/li\u003e\n\u003cli\u003eTackle a wide range of materials including PLA, PETG, TPU, ABS, and ASA with a 320°C capable hotend.\u003c\/li\u003e\n\u003cli\u003ePrint with confidence thanks to AI Spaghetti Detection, filament runout sensing, and power loss recovery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSerious 3D Printing, Without the Fuss\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Kobra S1 is a fully enclosed CoreXY FDM 3D printer built for makers, hobbyists, and professionals who want fast, reliable results without constantly babysitting their machine. Powered by Kobra OS and packed with smart automation features, it brings high-speed printing, broad material compatibility, and intelligent print monitoring together in a single, capable package.\u003c\/p\u003e\n\u003ch3\u003eSpeed and Precision Locked In by CoreXY\u003c\/h3\u003e\n\u003cp\u003eTired of watching slow, lumbering printers grind through complex models? The Kobra S1's CoreXY construction, driven by linear rod motion on both X and Y axes and a single-motor three-pole Z-axis, delivers smooth, stable movement at a recommended 300 mm\/s — with a maximum ceiling of 600 mm\/s and up to 20,000 mm\/s² acceleration. Pressure advance and flow calibration are built in, so what comes off the bed reflects what you designed, not what the printer could manage.\u003c\/p\u003e\n\u003ch3\u003eA Hotend That Handles What You Throw at It\u003c\/h3\u003e\n\u003cp\u003eWith a maximum nozzle temperature of 320°C and a PEI spring steel heated bed reaching up to 120°C, the Kobra S1 supports a broad material roster — PLA, PETG, TPU, ABS, and ASA — without requiring an upgrade. The standard 0.4mm nozzle handles everyday printing, while compatibility with 0.6mm and 0.8mm nozzles gives you flexibility for faster, rougher or more detail-focused work. The source material notes the hotend is designed for easy disassembly and clog-free performance.\u003c\/p\u003e\n\u003ch3\u003eSmart Monitoring Keeps Your Prints Safe\u003c\/h3\u003e\n\u003cp\u003eThe Kobra S1 watches over every job so you don't have to. AI Spaghetti Detection spots failed prints early and can halt the job before filament becomes a tangled mess. Filament runout detection pauses the print and waits for you to reload, filament entanglement detection flags spool issues before they cause a failure, and power loss resume picks up exactly where it left off after an unexpected outage. A built-in HD camera supporting 480P video monitoring means you can check in remotely via the Anycubic APP over Wi-Fi. LeviQ3.0 auto-levelling and Z-Offset adjustment handle bed calibration automatically, and object-skip with area levelling adds further precision control.\u003c\/p\u003e\n\u003ch3\u003eQuiet, Connected, and Easy to Control\u003c\/h3\u003e\n\u003cp\u003eAt as low as 44dB in Quiet mode, the Kobra S1 is considerate of its surroundings — a real advantage when printing long overnight jobs. The 4.3-inch capacitive touchscreen gives you direct, responsive control on the printer itself, while slicing software, the Anycubic APP, and USB connectivity round out your options. The interface supports nine languages, making it accessible whether you're setting it up for the first time or handing it to a colleague.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully enclosed CoreXY construction with a 250×250×250mm build volume for large, dimensionally accurate prints.\u003c\/li\u003e\n\u003cli\u003eRecommended print speed of 300 mm\/s and maximum of 600 mm\/s, with acceleration up to 20,000 mm\/s².\u003c\/li\u003e\n\u003cli\u003e320°C maximum nozzle temperature supports PLA, PETG, TPU, ABS, and ASA filaments.\u003c\/li\u003e\n\u003cli\u003eStandard 0.4mm nozzle, expandable to 0.6mm or 0.8mm for versatile output options.\u003c\/li\u003e\n\u003cli\u003ePEI spring steel heated bed reaches up to 120°C for reliable adhesion across material types.\u003c\/li\u003e\n\u003cli\u003eLeviQ3.0 auto-levelling with Z-Offset and object-skip area levelling for consistent first layers.\u003c\/li\u003e\n\u003cli\u003eAI Spaghetti Detection, filament runout detection, filament entanglement detection, and power loss resume for worry-free printing.\u003c\/li\u003e\n\u003cli\u003eBuilt-in HD camera (480P) for remote monitoring via the Anycubic APP over Wi-Fi.\u003c\/li\u003e\n\u003cli\u003eUltra-quiet operation at ≤44dB in Quiet mode and ≤46dB in Standard mode.\u003c\/li\u003e\n\u003cli\u003e4.3-inch capacitive touchscreen with nine-language support; controllable via printer, slicing software, Anycubic APP, or USB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 250*250*250mm³\u003c\/li\u003e\n\u003cli\u003eMax Printing Speed: Recommended 300 mm\/s; Maximum 600 mm\/s\u003c\/li\u003e\n\u003cli\u003eAcceleration: Recommended 10,000 mm\/s²; Maximum 20,000 mm\/s²\u003c\/li\u003e\n\u003cli\u003eMulticolor Printing: Sold separately\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PLA, PETG, TPU, ABS, ASA\u003c\/li\u003e\n\u003cli\u003eActive Drying: Not Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: Standard 0.4 mm, expandable to 0.6 \/ 0.8 mm\u003c\/li\u003e\n\u003cli\u003eMax Nozzle Temperature: 320°C\u003c\/li\u003e\n\u003cli\u003eHotbed Max Temperature: 120°C\u003c\/li\u003e\n\u003cli\u003eHotbed Material: PEI spring steel build plate\u003c\/li\u003e\n\u003cli\u003eFirmware: Kobra OS\u003c\/li\u003e\n\u003cli\u003eConstruction: CoreXY\u003c\/li\u003e\n\u003cli\u003eExtrusion Type: Short distance extrusion\u003c\/li\u003e\n\u003cli\u003eMotion System X-axis: Linear rods\u003c\/li\u003e\n\u003cli\u003eMotion System Y-axis: Linear rods\u003c\/li\u003e\n\u003cli\u003eMotion System Z-axis: Single motor with three guide poles\u003c\/li\u003e\n\u003cli\u003eAuto-Leveling: LeviQ3.0 Auto-leveling, Z-Offset\u003c\/li\u003e\n\u003cli\u003ePressure Advance \/ Flow Calibration: true\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: true\u003c\/li\u003e\n\u003cli\u003eFilament Detection and Auto Resume: true\u003c\/li\u003e\n\u003cli\u003eFilament Entanglement Detection: true\u003c\/li\u003e\n\u003cli\u003eAI Spaghetti Detection: true\u003c\/li\u003e\n\u003cli\u003eObject-Skip and Area Leveling: true\u003c\/li\u003e\n\u003cli\u003eControl and Print Methods: Via printer, Slicing software, Anycubic APP, USB (print only)\u003c\/li\u003e\n\u003cli\u003eTouchscreen: 4.3-\" capacitive touchscreen\u003c\/li\u003e\n\u003cli\u003eNoise Level: ≤46dB (Standard mode); ≤44dB (Quiet mode)\u003c\/li\u003e\n\u003cli\u003eVideo Monitoring: Standard HD camera, supports 480P\u003c\/li\u003e\n\u003cli\u003eMultilingual Support: EN \/ CN \/ DE \/ FR \/ IT \/ ES \/ RU \/ JP \/ KO\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB, Wi-Fi, Anycubic APP\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 40 x 41 x 49 cm³\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 9370g\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Kobra S1 Filament 3D Printer x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder x1\u003c\/li\u003e\n\u003cli\u003eScrews M3×6 x2\u003c\/li\u003e\n\u003cli\u003eU-Disk x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eHex Keys 2.5mm \/ 2.0mm \/ 1.5mm x1 set\u003c\/li\u003e\n\u003cli\u003eFilament Sample x1\u003c\/li\u003e\n\u003cli\u003eActivated Carbon x1\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaning Module x1\u003c\/li\u003e\n\u003cli\u003eNozzle Silicone Part x1\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaner x1\u003c\/li\u003e\n\u003cli\u003eGrease x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450141231,"sku":"KBS1BK0C-O","price":11030.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/KBS1BK0C-O_ANYCUBIC_KOBRA_S1_wr_01.jpg?v=1787927479"},{"product_id":"anycubic-kobra-3-max-3d-printer","title":"Anycubic Kobra 3 Max 3D Printer","description":"\u003cp\u003e\u003cstrong\u003eMassive 420 × 420 × 500 mm build volume | Speeds up to 600 mm\/s | Precise auto-levelling | Wi-Fi, app and cloud control | Power-loss resume\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint ambitious creations with a massive 420 mm × 420 mm × 500 mm build volume — room for truly large-scale single-piece prints\u003c\/li\u003e\n\u003cli\u003eAchieve faster results with print speeds of up to 600 mm\/s, cutting waiting time without sacrificing quality\u003c\/li\u003e\n\u003cli\u003eEnjoy reliable first-layer adhesion every time thanks to precise auto-levelling and a PEI magnetic spring hotbed\u003c\/li\u003e\n\u003cli\u003eStay in control from anywhere — manage prints via the Anycubic App, AC Cloud, or Anycubic Slicer Next over Wi-Fi\u003c\/li\u003e\n\u003cli\u003ePrint with confidence knowing power-loss resume and filament runout detection protect your long prints from interruption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScale Up Your 3D Printing\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Kobra 3 Max is a large-format FDM 3D printer built for makers, designers, and hobbyists who are ready to stop thinking small. With a 420 mm × 420 mm × 500 mm build volume, it lets you produce genuinely large prints in a single run — from cosplay props and architectural models to functional prototypes and statement display pieces. Pair that with print speeds of up to 600 mm\/s and you have a machine that matches ambition with efficiency.\u003c\/p\u003e\n\u003ch3\u003eA Bed You Can Trust, Every Single Print\u003c\/h3\u003e\n\u003cp\u003eTired of spending more time levelling your bed than actually printing? The Kobra 3 Max takes that frustration away with its precise auto-levelling system, which probes the hotbed automatically and compensates for any surface variation before each print begins. The PEI magnetic spring board provides reliable adhesion during printing and releases finished parts cleanly once cooled, so you spend less time fussing and more time making.\u003c\/p\u003e\n\u003ch3\u003eIntelligent Protection for Long Runs\u003c\/h3\u003e\n\u003cp\u003eLong prints on a large machine deserve long-print protection. The Kobra 3 Max includes both power-loss resume and filament runout detection with auto resume. If the power cuts unexpectedly, the printer picks up exactly where it left off when you turn it back on. If your filament spool runs dry mid-print, it alerts you to reload and then continues — keeping hours of print time from going to waste.\u003c\/p\u003e\n\u003ch3\u003eConnect, Slice, and Print Your Way\u003c\/h3\u003e\n\u003cp\u003eThe Kobra 3 Max gives you multiple ways to work. Slice models in Anycubic Slicer or Orca Slicer, send files via USB drive or over Wi-Fi through AC Cloud and Anycubic Slicer Next, and monitor and control print jobs remotely from your phone using the Anycubic App. The onboard touchscreen handles quick adjustments right at the machine, and a dedicated port for cameras and other peripherals is available for expanded monitoring. Supported filaments include PLA, TPU, PETG, and ABS, giving you genuine material flexibility within a single machine.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 420 mm × 420 mm × 500 mm build volume for oversized single-piece prints\u003c\/li\u003e\n\u003cli\u003eFDM printing technology with a single 0.4 mm nozzle and layer thickness range of 0.08–0.28 mm\u003c\/li\u003e\n\u003cli\u003ePrint speeds up to 600 mm\/s for faster turnaround on large projects\u003c\/li\u003e\n\u003cli\u003ePrecise auto-levelling system for consistent first-layer adhesion without manual adjustment\u003c\/li\u003e\n\u003cli\u003ePEI magnetic spring hotbed for reliable adhesion during printing and easy part removal after cooling\u003c\/li\u003e\n\u003cli\u003ePower-loss resume automatically continues a print after an unexpected power cut\u003c\/li\u003e\n\u003cli\u003eFilament runout detection with auto resume prevents failed prints due to empty spools\u003c\/li\u003e\n\u003cli\u003eWi-Fi connectivity (2.4 GHz) with support for AC Cloud, Anycubic App, Anycubic Slicer Next, and USB drive printing\u003c\/li\u003e\n\u003cli\u003eCompatible with PLA, TPU, PETG, and ABS filaments\u003c\/li\u003e\n\u003cli\u003eTouchscreen control panel with multilingual support\u003c\/li\u003e\n\u003cli\u003eCamera and peripherals port available for optional video monitoring\u003c\/li\u003e\n\u003cli\u003eDual metal spindles on Y-axis and lead screws on Z-axis for stable, accurate motion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modelling)\u003c\/li\u003e\n\u003cli\u003ePrinting Volume: 420 mm (L) × 420 mm (W) × 500 mm (H)\u003c\/li\u003e\n\u003cli\u003ePrint Layer Thickness: 0.08 - 0.28 mm\u003c\/li\u003e\n\u003cli\u003eMax Printing Speed: Up to 600 mm\/s\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PLA, TPU, PETG, ABS\u003c\/li\u003e\n\u003cli\u003eNozzle Diameter: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eHotbed Material: PEI magnetic spring board\u003c\/li\u003e\n\u003cli\u003eExtrusion Type: Single\u003c\/li\u003e\n\u003cli\u003eMotion System Y-axis: Double metal spindles\u003c\/li\u003e\n\u003cli\u003eMotion System Z-axis: Lead screws\u003c\/li\u003e\n\u003cli\u003eAuto-Leveling: Auto-Level (Precise Auto-Leveling)\u003c\/li\u003e\n\u003cli\u003ePower Loss Resume: true\u003c\/li\u003e\n\u003cli\u003eFilament Detection and Auto Resume: true\u003c\/li\u003e\n\u003cli\u003eControl and Print Methods: Touchscreen, Anycubic App, Anycubic Slicer Next, U-Disk, AC Cloud\u003c\/li\u003e\n\u003cli\u003eTouchscreen: Yes (Touchscreen)\u003c\/li\u003e\n\u003cli\u003eVideo Monitoring: Yes (Cameras and Other Peripherals port available)\u003c\/li\u003e\n\u003cli\u003eMultilingual Support: Yes\u003c\/li\u003e\n\u003cli\u003eSlicer Software: Anycubic Slicer, Orca Slicer\u003c\/li\u003e\n\u003cli\u003eInput File Formats: .STL,.OBJ,.3mf\u003c\/li\u003e\n\u003cli\u003eOutput File Formats: G-code\u003c\/li\u003e\n\u003cli\u003eConnectivity: U-DISK, AC Cloud, Anycubic Slicer Next, Wi-Fi\u003c\/li\u003e\n\u003cli\u003eWi-Fi Spec: 2.4G (2.400-2.4835GHz); Working Mode: AP, STA, AP+STA\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 706 mm (L) × 640 mm (W) × 753 mm (H)\u003c\/li\u003e\n\u003cli\u003eMachine Weight: ~18 KG\u003c\/li\u003e\n\u003cli\u003ePower Input: 110 V \/ 220 V AC\u003c\/li\u003e\n\u003cli\u003eRated Power: 1100 W\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Kobra 3 Max Printer Frame x1\u003c\/li\u003e\n\u003cli\u003eBase Housing x1\u003c\/li\u003e\n\u003cli\u003ePrinthead x1\u003c\/li\u003e\n\u003cli\u003eTouchscreen x1\u003c\/li\u003e\n\u003cli\u003eSpool Holder x1\u003c\/li\u003e\n\u003cli\u003eCable Holder x1\u003c\/li\u003e\n\u003cli\u003eSupport Rod x1\u003c\/li\u003e\n\u003cli\u003eBag No.1 (Frame screws) x1\u003c\/li\u003e\n\u003cli\u003eBag No.2 (Support Rod screws) x1\u003c\/li\u003e\n\u003cli\u003eBag No.3 (Printhead Cable screws) x1\u003c\/li\u003e\n\u003cli\u003eBag No.4 (Printhead screws) x1\u003c\/li\u003e\n\u003cli\u003eBag No.5 (Touchscreen screws) x1\u003c\/li\u003e\n\u003cli\u003eBag No.6 (Spool Holder screws) x1\u003c\/li\u003e\n\u003cli\u003eU Disk x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eCable Organiser x5\u003c\/li\u003e\n\u003cli\u003eFilament Tube x1\u003c\/li\u003e\n\u003cli\u003eAllen Keys (6.0 \/ 4.0 \/ 3.0 \/ 2.5 \/ 2.0 \/ 1.5 mm) x1 set\u003c\/li\u003e\n\u003cli\u003eWrench x1\u003c\/li\u003e\n\u003cli\u003eNozzle Cleaner x1\u003c\/li\u003e\n\u003cli\u003eFilament (sample) x1\u003c\/li\u003e\n\u003cli\u003eGrease x1\u003c\/li\u003e\n\u003cli\u003eUser Manual x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Anycubic\u003c\/h3\u003e\n\u003cp\u003eAnycubic has been at the forefront of accessible 3D printing technology since 2015, driven by the belief that the freedom to make should belong to everyone. From compact desktop printers to large-format machines like the Kobra 3 Max, every product is designed to lower the barrier between an idea and a finished object — backed by a global support network and a community of millions of makers.\u003c\/p\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450173999,"sku":"KB3MBK0A-O","price":12040.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/KB3MBK0A-O_Anycubic_Kobra_3_Max_3D_Printer_wr_01.png?v=1787927484"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-titanium-grey","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Titanium Grey","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Titanium Grey variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Titanium Grey (#545358)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Titanium Grey (#545358)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg – Titanium Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450206767,"sku":"HTFIG-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTFIG-101_Anycubic-PETG-CF-Satin-Carbon-Fiber-Filament-1kg-Titanium-Grey_wr_01.jpg?v=1787927488"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-black","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Black","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Black variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Black (#2D2926)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#2D2926)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg – Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450239535,"sku":"HTFBK-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTFBK-101_Anycubic-PETG-CF-Satin-Carbon-Fiber-Filament-1kg-Black_wr_01.jpg?v=1787927493"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-indigo-blue","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Indigo Blue","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Indigo Blue variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Indigo Blue (#0E4174)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Indigo Blue (#0E4174)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg – Indigo Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450272303,"sku":"HTFAF-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTFAF-101_Anycubic-PETG-CF-Satin-Carbon-Fiber-Filament-1kg-Indigo-Blue_wr_01.jpg?v=1787927497"},{"product_id":"anycubic-tpu-68d-filament-1kg-yellow","title":"Anycubic TPU 68D filament 1kg – Yellow","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Yellow is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Yellow (#F7EA48)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Yellow x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450305071,"sku":"HTAVY-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTAVY-101_Anycubic-TPU-68D-filament-_E2_80_93-Yellow_wr_01.jpg?v=1787927501"},{"product_id":"anycubic-tpu-68d-filament-1kg-red","title":"Anycubic TPU 68D filament 1kg – Red","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Red is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Red (#E10600)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Red x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450337839,"sku":"HTARR-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTARR-101_Anycubic-TPU-68D-filament-_E2_80_93-Red_wr_01.jpg?v=1787927505"},{"product_id":"anycubic-tpu-68d-filament-1kg-neon-green","title":"Anycubic TPU 68D filament 1kg – Neon Green","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Neon Green is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Neon Green\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Neon Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450370607,"sku":"HTANG-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTANG-101_Anycubic-TPU-68D-filament-_E2_80_93-Neon-Green_wr_01.jpg?v=1787927509"},{"product_id":"anycubic-tpu-68d-filament-1kg-grey","title":"Anycubic TPU 68D filament 1kg – Grey","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Grey is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Grey (#969393)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450403375,"sku":"HTAGE-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTAGE-101_Anycubic-TPU-68D-filament-_E2_80_93-Grey_wr_01.jpg?v=1787927514"},{"product_id":"anycubic-tpu-68d-filament-1kg-blue","title":"Anycubic TPU 68D filament 1kg – Blue","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Blue is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Blue (#5E93DB)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450436143,"sku":"HTADB-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTADB-101_Anycubic-TPU-68D-filament-_E2_80_93-Blue_wr_01.jpg?v=1787927518"},{"product_id":"anycubic-tpu-68d-filament-1kg-white","title":"Anycubic TPU 68D filament 1kg – White","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in White is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#F1F0ED)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450501679,"sku":"HTABW-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTABW-101_Anycubic-TPU-68D-filament-_E2_80_93-White_wr_01.jpg?v=1787927523"},{"product_id":"anycubic-tpu-68d-filament-1kg-black","title":"Anycubic TPU 68D filament 1kg - Black","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Black is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#101820)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450534447,"sku":"HTABK-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTABK-101_Anycubic_TPU_68D_filament_-_Black_wr_01.png?v=1787927527"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-syrup-brown","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg - Syrup Brown","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Syrup Brown variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Syrup Brown (#99403A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Syrup Brown (#99403A)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg - Syrup Brown x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450698287,"sku":"HPFVR-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPFVR-101_Anycubic_PETG-CF_Satin_Carbon_Fiber_Fila_wr_01.jpg?v=1787927531"},{"product_id":"anycubic-pc-filament-1kg-white","title":"Anycubic PC Filament 1kg – White","description":"\u003cp\u003e\u003cstrong\u003eEngineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row main-content-wrap\"\u003e\n\u003cdiv class=\"main-content col-lg-12\"\u003e\n\u003cdiv id=\"primary\" class=\"content-area\"\u003e\n\u003cp\u003eThe Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm\/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ\/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.\u003c\/p\u003e\n\u003cdiv id=\"product-7160233\" class=\"product type-product post-7160233 status-publish first onbackorder product_cat-coming-soon product_tag-anycubic-filament-black product_tag-anycubic-pc-filament product_tag-black-pc-filament product_tag-fdm-pc-filament product_tag-high-temp-filament product_tag-pc-3d-printing-filament product_tag-polycarbonate-3d-filament product_tag-polycarbonate-filament-1kg has-post-thumbnail taxable shipping-taxable purchasable product-type-simple product-layout-full_width\"\u003e\n\u003cdiv class=\"product-summary-wrap\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"summary entry-summary col-lg-6\"\u003e\n\u003cdiv id=\"product-tab\" class=\"woocommerce-tabs woocommerce-tabs-3wsymraa resp-htabs\"\u003e\n\u003cdiv class=\"resp-tabs-container\"\u003e\n\u003cdiv id=\"tab-description\" class=\"tab-content resp-tab-content resp-tab-content-active\" aria-labelledby=\"tab_item-0\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering-grade PC filament for structural, functional, and outdoor applications\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature of 110°C — resists warping and deformation under prolonged heat\u003c\/li\u003e\n\u003cli\u003eIzod impact strength of 30±12 kJ\/m² (X-Y) for tough, crack-resistant parts\u003c\/li\u003e\n\u003cli\u003eTensile strength of 65±6 MPa and bending strength of 105±10 MPa\u003c\/li\u003e\n\u003cli\u003eSmooth, translucent, and lustrous surface finish\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system to reduce filament entanglement\u003c\/li\u003e\n\u003cli\u003eActive drying required before use: 80°C for 8–12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#FFFFFF)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 80 ℃, 8-12 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 270-290 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 100-120 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.2 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 15-20 g\/10 min (270℃\/1.2kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 230 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 122 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 110 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 65±6 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 9±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2900±150 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 105±10 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 30±12 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 25±7 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Engineering filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PC Filament 1kg – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450731055,"sku":"HPCWH-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPCWH-101_Anycubic-PC-Filament-1kg-_E2_80_93-White_wr_01.jpg?v=1787927536"},{"product_id":"anycubic-pc-filament-1kg-translucent-white","title":"Anycubic PC Filament 1kg – Translucent White","description":"\u003cp\u003e\u003cstrong\u003eEngineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row main-content-wrap\"\u003e\n\u003cdiv class=\"main-content col-lg-12\"\u003e\n\u003cdiv id=\"primary\" class=\"content-area\"\u003e\n\u003cp\u003eThe Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm\/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ\/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.\u003c\/p\u003e\n\u003cdiv id=\"product-7160233\" class=\"product type-product post-7160233 status-publish first onbackorder product_cat-coming-soon product_tag-anycubic-filament-black product_tag-anycubic-pc-filament product_tag-black-pc-filament product_tag-fdm-pc-filament product_tag-high-temp-filament product_tag-pc-3d-printing-filament product_tag-polycarbonate-3d-filament product_tag-polycarbonate-filament-1kg has-post-thumbnail taxable shipping-taxable purchasable product-type-simple product-layout-full_width\"\u003e\n\u003cdiv class=\"product-summary-wrap\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"summary entry-summary col-lg-6\"\u003e\n\u003cdiv id=\"product-tab\" class=\"woocommerce-tabs woocommerce-tabs-3wsymraa resp-htabs\"\u003e\n\u003cdiv class=\"resp-tabs-container\"\u003e\n\u003cdiv id=\"tab-description\" class=\"tab-content resp-tab-content resp-tab-content-active\" aria-labelledby=\"tab_item-0\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering-grade PC filament for structural, functional, and outdoor applications\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature of 110°C — resists warping and deformation under prolonged heat\u003c\/li\u003e\n\u003cli\u003eIzod impact strength of 30±12 kJ\/m² (X-Y) for tough, crack-resistant parts\u003c\/li\u003e\n\u003cli\u003eTensile strength of 65±6 MPa and bending strength of 105±10 MPa\u003c\/li\u003e\n\u003cli\u003eSmooth, translucent, and lustrous surface finish\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system to reduce filament entanglement\u003c\/li\u003e\n\u003cli\u003eActive drying required before use: 80°C for 8–12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent White\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 80 ℃, 8-12 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 270-290 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 100-120 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.2 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 15-20 g\/10 min (270℃\/1.2kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 230 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 122 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 110 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 65±6 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 9±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2900±150 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 105±10 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 30±12 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 25±7 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Engineering filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PC Filament 1kg – Translucent White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450763823,"sku":"HPCTW-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPCTW-101_Anycubic-PC-Filament-1kg-_E2_80_93-Translucent-White_wr_01.jpg?v=1787927540"},{"product_id":"anycubic-pc-filament-1kg-black","title":"Anycubic PC Filament 1kg - Black","description":"\u003cp\u003e\u003cstrong\u003eEngineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm\/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ\/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering-grade PC filament for structural, functional, and outdoor applications\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature of 110°C — resists warping and deformation under prolonged heat\u003c\/li\u003e\n\u003cli\u003eIzod impact strength of 30±12 kJ\/m² (X-Y) for tough, crack-resistant parts\u003c\/li\u003e\n\u003cli\u003eTensile strength of 65±6 MPa and bending strength of 105±10 MPa\u003c\/li\u003e\n\u003cli\u003eSmooth, translucent, and lustrous surface finish\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system to reduce filament entanglement\u003c\/li\u003e\n\u003cli\u003eActive drying required before use: 80°C for 8–12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#212322)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 80 ℃, 8-12 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 270-290 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 100-120 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.2 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 15-20 g\/10 min (270℃\/1.2kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 230 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 122 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 110 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2550±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 65±6 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 9±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2900±150 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 105±10 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 30±12 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 25±7 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Engineering filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PC Filament 1kg - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450796591,"sku":"HPCBK-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPCBK-101_Anycubic_PC_Filament_1kg_-_Black_wr_02.jpg?v=1787927543"},{"product_id":"anycubic-pla-glow-filament-green-green-glow","title":"Anycubic PLA Glow Filament - Green (Green Glow)","description":"\u003cp\u003e\u003cstrong\u003eGlows green in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Glow Filament in Green (Green Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous green glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm\/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlows green continuously for up to 2 hours after a short charge under sunlight\u003c\/li\u003e\n\u003cli\u003eEco-friendly luminescent material — free of heavy metals and radioactive particles\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to bending and tearing for durable decorative prints\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic printers (new version)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and MSDS\/SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Green (Green Glow)\u003c\/li\u003e\n\u003cli\u003eSize: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 60-65 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 162 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 64℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 55 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2200±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50±3 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±3%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2700±50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 82±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 24±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 38±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eRecommended to Print:\n\u003cul\u003e\n\u003cli\u003eDecorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Glow Filament - Green (Green Glow) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450862127,"sku":"HFGGN-105","price":580.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HFGGN-105_Anycubic-PLA-Glow-Filament-Green-Green-Glow_wr_01.jpg?v=1787927548"},{"product_id":"anycubic-pla-glow-filament-white-blue-glow","title":"Anycubic PLA Glow Filament - White (Blue Glow)","description":"\u003cp\u003e\u003cstrong\u003eGlows blue in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Glow Filament in White (Blue Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous blue glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm\/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlows blue continuously for up to 2 hours after a short charge under sunlight\u003c\/li\u003e\n\u003cli\u003eEco-friendly luminescent material — free of heavy metals and radioactive particles\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to bending and tearing for durable decorative prints\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic printers (new version)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and MSDS\/SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (Blue Glow)\u003c\/li\u003e\n\u003cli\u003eSize: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 60-65 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 162 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 64℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 55 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2200±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50±3 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±3%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2700±50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 82±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 24±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 38±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eRecommended to Print:\n\u003cul\u003e\n\u003cli\u003eDecorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Glow Filament - White (Blue Glow) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450927663,"sku":"HFGBL-105","price":580.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HFGBL-105_Anycubic-PLA-Glow-Filament-White-Blue-Glow_wr_01.jpg?v=1787927552"},{"product_id":"anycubic-pla-glow-filament-blue-blue-glow","title":"Anycubic PLA Glow Filament - Blue (Blue Glow)","description":"\u003cp\u003e\u003cstrong\u003eGlows blue in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Glow Filament in Blue (Blue Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous blue glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm\/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlows blue continuously for up to 2 hours after a short charge under sunlight\u003c\/li\u003e\n\u003cli\u003eEco-friendly luminescent material — free of heavy metals and radioactive particles\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to bending and tearing for durable decorative prints\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic printers (new version)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and MSDS\/SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Blue (Blue Glow)\u003c\/li\u003e\n\u003cli\u003eSize: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 60-65 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 162 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 64℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 55 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2200±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50±3 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±3%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2700±50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 82±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 24±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 38±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eRecommended to Print:\n\u003cul\u003e\n\u003cli\u003eDecorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Glow Filament - Blue (Blue Glow) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450960431,"sku":"HFGBE-105","price":580.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HFGBE-105_Aycubic_PLA_Glow_Filament_-_Blue_Blue_Gl_wr_01.png?v=1787927556"},{"product_id":"anycubic-ace-2-pro-for-kobra-x-and-s1-m","title":"Anycubic Ace 2 Pro - For Kobra X and S1\/M","description":"\u003cp\u003e\u003cstrong\u003e4-channel active drying and feeding hub | Print-while-drying workflow | Brushless motors for quiet, reliable operation | Sealed moisture control | Compatible with Kobra X, S1, and S1 Max\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry and print simultaneously with active 65 °C drying — keep your filament fresh without pausing a single job\u003c\/li\u003e\n\u003cli\u003eFeed four colours at once through four independent brushless motors running at under 48 dB for smooth, near-silent operation\u003c\/li\u003e\n\u003cli\u003eSwitch filaments faster with a next-generation buffer mechanism that doubles loading speed compared to the previous generation\u003c\/li\u003e\n\u003cli\u003eProtect every spool with sealed storage, an electromagnetic moisture valve, and real-time temperature and humidity monitoring\u003c\/li\u003e\n\u003cli\u003eBuilt to last with an alumina ceramic filament feeding port that resists wear far longer than standard plastic alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUpgrade Your Multi-Material Workflow\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic ACE 2 Pro is designed for FDM makers who want a reliable, intelligent hub to manage multiple filaments — drying them, feeding them, and keeping them in peak condition, all at the same time. Compatible with the Kobra X, Kobra S1, and Kobra S1 Max, it connects seamlessly into your existing setup and replaces the guesswork of manual filament management with a fully automated system.\u003c\/p\u003e\n\u003ch3\u003eNever Stop Printing to Dry Your Filament Again\u003c\/h3\u003e\n\u003cp\u003eTired of halting your print jobs just to run a separate drying cycle? The ACE 2 Pro supports simultaneous drying and printing, maintaining a chamber temperature of up to 65 °C while your printer keeps running. Built-in temperature and humidity sensors monitor conditions in real time, an electromagnetic valve actively expels moisture, and a silicone sealing ring blocks external humidity from creeping back in. Your filament stays as fresh as the day it came out of the bag.\u003c\/p\u003e\n\u003ch3\u003eFaster, Quieter, More Reliable Feeding\u003c\/h3\u003e\n\u003cp\u003eFour independent brushless motors — each rated for a lifespan of 5,000 hours or more — drive the next-generation buffer mechanism, delivering smooth and stable filament feed and retraction across all four channels. Operating at under 48 dB during closed-door printing, the ACE 2 Pro keeps your workspace quiet. Filament loading speed is doubled compared to the previous ACE Pro generation, meaning less waiting between colour changes and more time spent actually printing. The alumina ceramic filament feeding port adds another layer of durability, offering superior abrasion resistance over standard plastic ports for reduced long-term maintenance.\u003c\/p\u003e\n\u003ch3\u003eIntelligent Monitoring and Jam-Free Maintenance\u003c\/h3\u003e\n\u003cp\u003eThe ACE 2 Pro keeps you informed and in control. Real-time temperature and humidity readings are displayed on the app, slicer, and printer screen. Filament runout detection and auto-resume printing mean unexpected interruptions are handled automatically. When a jam does occur, the quick-release external feeding channel and buffer mechanism allow rapid disassembly so you can clear the issue and get back to printing in seconds. Intelligent filament identification auto-detects Anycubic filament parameters when connected — eliminating manual profile configuration for supported materials.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint-while-drying support: active 65 °C drying operates simultaneously with printing for an uninterrupted workflow\u003c\/li\u003e\n\u003cli\u003eFour independent brushless motors with a rated lifespan of 5,000+ hours ensure stable, jam-resistant filament feeding across all channels\u003c\/li\u003e\n\u003cli\u003eNext-generation buffer mechanism doubles filament loading speed compared to the ACE Pro predecessor\u003c\/li\u003e\n\u003cli\u003eSealed storage with electromagnetic moisture valve and silicone sealing ring provides active and passive humidity protection\u003c\/li\u003e\n\u003cli\u003eBuilt-in temperature and humidity sensors with real-time readout on app, slicer, and printer screen\u003c\/li\u003e\n\u003cli\u003eAlumina ceramic filament feeding port for superior wear resistance and extended operational lifespan\u003c\/li\u003e\n\u003cli\u003eFilament runout detection and auto-resume printing minimise downtime from depleted spools\u003c\/li\u003e\n\u003cli\u003eQuick-release external feeding channel for fast jam clearance and easy maintenance\u003c\/li\u003e\n\u003cli\u003eIntelligent filament identification automatically detects compatible Anycubic filament parameters (requires internet connection and Anycubic proprietary filaments)\u003c\/li\u003e\n\u003cli\u003eCompatible with Kobra X, Kobra S1 Max, and Kobra S1 (this variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Anycubic\u003c\/li\u003e\n\u003cli\u003eProduct Name: Anycubic ACE 2 Pro\u003c\/li\u003e\n\u003cli\u003eManufacturer: Anycubic\u003c\/li\u003e\n\u003cli\u003eAccessory Type: Multi-Material \/ Filament Hub \u0026amp; Dryer\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM\u003c\/li\u003e\n\u003cli\u003eCompatible Printer Models: Kobra X, Kobra S1 Max, Kobra S1, Kobra 3 Max, Kobra 3 V2, Kobra 3\u003c\/li\u003e\n\u003cli\u003eQuantity per Pack: 1\u003c\/li\u003e\n\u003cli\u003eWeight: 3.7 kg\u003c\/li\u003e\n\u003cli\u003ePackage Dimensions: 445 x 345 x 320 mm\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 4.8 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 4\u003c\/li\u003e\n\u003cli\u003eCompatible Filament Diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eHub \/ Feed Type: Active Filament Dryer and Feeder Hub with Buffer Mechanism\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 368 x 291.5 x 236.5 mm\u003c\/li\u003e\n\u003cli\u003eProduct Material: ABS \/ PC\u003c\/li\u003e\n\u003cli\u003eMaximum Spool Capacity: 4 spools (Flange diameter: 195-200mm; Spool width: 60-68mm; Flange thickness: 3-6mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic ACE 2 Pro x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eSingle Cable — A and B x2\u003c\/li\u003e\n\u003cli\u003eTeflon Tube x4\u003c\/li\u003e\n\u003cli\u003eCable Clip x4\u003c\/li\u003e\n\u003cli\u003eAdapter Plate (for Kobra X \/ S1 Max \/ S1) x1\u003c\/li\u003e\n\u003cli\u003eReturn Detection Module including 4-in-1 Filament Hub (for Kobra X \/ S1 Max \/ S1) x1\u003c\/li\u003e\n\u003cli\u003eM2.5×6 screws (for Kobra X \/ S1 Max \/ S1) x2\u003c\/li\u003e\n\u003cli\u003eM2.5×25 screws (for Kobra X \/ S1 Max \/ S1) x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Anycubic\u003c\/h3\u003e\n\u003cp\u003eAnycubic has spent years engineering desktop 3D printing hardware that pushes the boundary between professional capability and everyday usability. From precision hotends to intelligent multi-material systems, every Anycubic accessory is built to integrate seamlessly with their printer ecosystem — giving makers the confidence to tackle more complex, more colourful, and more demanding projects.\u003c\/p\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450993199,"sku":"DS20BK2A-O","price":6230.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/DS20BK2A-O_Anycubic_Ace_2_Pro_-_For_Kobra_X_and_S1M_wr_03.png?v=1787927560"},{"product_id":"anycubic-ace-2-pro-for-kobra-3-max","title":"Anycubic ACE 2 Pro for Kobra 3 Max","description":"\u003cp\u003e\u003cstrong\u003e4-channel active filament feed \u0026amp; retract | 65°C drying while printing | Independent brushless motors | Sealed moisture control | Compatible with Kobra 3 Max and more\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic ACE 2 Pro is a next-generation multi-material filament feed and drying hub designed for Anycubic FDM printers including the Kobra 3 Max. Tired of moisture-damaged filament ruining your prints? The ACE 2 Pro's active drying system reaches up to 65°C and keeps working while you print, so your spools stay fresh and your results stay consistent. Four independent brushless motors drive the feed and retract buffer mechanism across all four channels, delivering smoother, more reliable filament changes with a feed rate of 50 mm\/s — twice that of the previous generation. Built-in temperature and humidity sensors monitor chamber conditions in real time, while an electromagnetic valve actively expels moisture and a silicone sealing ring blocks it from re-entering. Alumina ceramic filament feeding ports offer superior abrasion resistance over standard plastic ports, extending the hub's operational lifespan with lower maintenance demands. The quick-release external buffer channel makes clearing any jams fast and straightforward, keeping your downtime to a minimum. A capable, quietly operating upgrade for any serious multi-material printing setup.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-channel active filament feed and retract hub, compatible with the Anycubic Kobra 3 Max\u003c\/li\u003e\n\u003cli\u003eFour independent brushless motors with next-generation buffer mechanism for smooth, jam-free feeding across all channels\u003c\/li\u003e\n\u003cli\u003eActive drying up to 65°C with simultaneous print-while-drying capability\u003c\/li\u003e\n\u003cli\u003eBuilt-in temperature and humidity sensors with electromagnetic valve for active moisture removal\u003c\/li\u003e\n\u003cli\u003eSealed storage with silicone sealing ring for long-term humidity protection\u003c\/li\u003e\n\u003cli\u003eAlumina ceramic filament feeding ports for enhanced abrasion resistance and longevity\u003c\/li\u003e\n\u003cli\u003eFeed rate of 50 mm\/s — double that of the previous ACE Pro generation\u003c\/li\u003e\n\u003cli\u003eQuick-release external buffer channel for fast jam clearing and easy maintenance\u003c\/li\u003e\n\u003cli\u003eSupports filament runout detection and auto-resume printing\u003c\/li\u003e\n\u003cli\u003eOperates at under 48 dB (closed-door printing) for quiet workshop operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing Material: ABS \/ PC\u003c\/li\u003e\n\u003cli\u003eMotors: Brushless motor *4\u003c\/li\u003e\n\u003cli\u003eActive Moisture Control: Supported\u003c\/li\u003e\n\u003cli\u003eSealed Storage: Supported\u003c\/li\u003e\n\u003cli\u003eExternally Mounted PTFE Tube: Supported\u003c\/li\u003e\n\u003cli\u003eTemp. \u0026amp; Humidity Monitoring‌: Supported, display on APP, slicer \u0026amp; printer screen\u003c\/li\u003e\n\u003cli\u003eFilament Intelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eFilament Runout Detection: Supported\u003c\/li\u003e\n\u003cli\u003eAuto-Resume Printing: Supported\u003c\/li\u003e\n\u003cli\u003ePower Rating: 220V: 330W Max; 110V: 235W Max\u003c\/li\u003e\n\u003cli\u003eMax. Drying Temp: 65 ℃\u003c\/li\u003e\n\u003cli\u003eMachine Dimensions: 368 x 291.5 x 236.5mm³\u003c\/li\u003e\n\u003cli\u003eMachine Weight: 3700g\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dry), BVOH (dry), PP, POM, HIPS, PLA-CF, PETG-CF, PAHT-CF, TPU (for ACE), PVB\u003c\/li\u003e\n\u003cli\u003eFilament Diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eSpool Compatibility: Flange diameter: 195-200mm; Spool width: 60-68mm; Flange thickness: 3-6mm\u003c\/li\u003e\n\u003cli\u003ePrinter Compatibility: Kobra 3 Max\u003c\/li\u003e\n\u003cli\u003eDrying Efficacy: Suitable for drying: PLA, PETG, PVB; Compatible but not optimal: ASA, ABS, PET, PA, PC, PP, BVOH, POM, HIPS, Fiber-reinforced materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic ACE 2 Pro x1\u003c\/li\u003e\n\u003cli\u003ePower Cord x1\u003c\/li\u003e\n\u003cli\u003eSingle Cable A x1\u003c\/li\u003e\n\u003cli\u003eSingle Cable B x1\u003c\/li\u003e\n\u003cli\u003eTeflon Tube x4\u003c\/li\u003e\n\u003cli\u003eCable Clip x4\u003c\/li\u003e\n\u003cli\u003ePurge Wiper (Kobra 3 Max series) x1\u003c\/li\u003e\n\u003cli\u003e4-in-1 Filament Hub x1\u003c\/li\u003e\n\u003cli\u003eM3*7 screws x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: This product only contains the ACE 2 Pro unit and not any additional filments or the Kobra 3 Max as pictured. Images are for illustrative purposes only.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451025967,"sku":"DS20BK1A-O","price":6230.0,"currency_code":"NAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/DS20BK1A-O_Anycubic-ACE-2-Pro-for-Kobra-3-Max_wr_01a.jpg?v=1787927565"},{"product_id":"anycubic-pla-matte-filament-1kg-nardo-grey","title":"Anycubic PLA Matte Filament 1kg - Nardo Grey","description":"\u003cp\u003e\u003cstrong\u003eSmooth matte finish that hides layer lines | Clean support removal with no sanding required | Compatible with 0.2 mm nozzles and above | Pre-configured factory parameters for consistent results | 1 kg spool of FDM PLA filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Matte filament in Nardo Grey is designed for FDM 3D printing enthusiasts who want display-quality results without extensive post-processing. Its fine, uniform matte texture naturally minimises the appearance of layer lines, making it well suited to decorative parts, artistic sculptures, anime figurines, and fandom pieces. Supports peel away cleanly, leaving a smooth contact surface that needs no sanding. Pre-configured with factory-tuned printing parameters, it works at nozzle temperatures between 190 °C and 230 °C, a heated bed of 60–65 °C, and printing speeds from 50 to 250 mm\/s — so you spend less time calibrating and more time creating. The 1 kg spool covers a broad range of projects, and the filament is compatible with any 1.75 mm FDM printer using a 0.2 mm or larger nozzle.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatte texture minimises visible layer lines for cleaner, more realistic prints\u003c\/li\u003e\n\u003cli\u003eSupports remove cleanly and effortlessly — no sanding or post-processing needed\u003c\/li\u003e\n\u003cli\u003ePre-configured factory parameters for consistent, high-quality results straight away\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or above\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for automatic parameter recognition on compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement and feeding errors\u003c\/li\u003e\n\u003cli\u003eCompliant with RoHS, REACH, and SDS certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Matte Nardo Grey (#898B8E)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 190-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 8±3 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 163 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 57 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 54 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2600±150 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38±2 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3200±100 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 67±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 19±1 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±2 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks, anime figurines\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Matte Filament 1kg - Nardo Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451058735,"sku":"AHYGNG-101","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHYGNG-101_Anycubic_PLA_Matte_Filament_1kg_-_Nardo__wr_01.png?v=1787927569"}],"url":"https:\/\/shop.pektech.com.na\/collections\/3d-printing.oembed?page=3","provider":"PEKTECH","version":"1.0","type":"link"}