{"title":"3D Printer Materials","description":null,"products":[{"product_id":"anycubic-water-wash-resin-2-0-white","title":"Anycubic Water Wash Resin 2.0 – White","description":"\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row main-content-wrap\"\u003e\n\u003cdiv class=\"main-content col-lg-12\"\u003e\n\u003cdiv id=\"primary\" class=\"content-area\"\u003e\n\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | White finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"product-7160260\" class=\"product type-product post-7160260 status-publish first onbackorder product_cat-coming-soon has-post-thumbnail taxable shipping-taxable purchasable product-type-simple product-layout-full_width\"\u003e\n\u003cdiv class=\"product-summary-wrap\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"summary entry-summary col-lg-6\"\u003e\n\u003cdiv id=\"product-tab\" class=\"woocommerce-tabs woocommerce-tabs-2xmr12wy resp-htabs\"\u003e\n\u003cdiv class=\"resp-tabs-container\"\u003e\n\u003cdiv id=\"tab-description\" class=\"tab-content resp-tab-content resp-tab-content-active\" aria-labelledby=\"tab_item-0\"\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 White is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eWhite colour for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#EFF0F1)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449518639,"sku":"SSX2WH-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2WH-103A_Anycubic-Water-Wash-Resin-2.0-White_wr_01a.jpg?v=1787927396"},{"product_id":"anycubic-water-wash-resin-2-0-translucent-red","title":"Anycubic Water Wash Resin 2.0 – Translucent Red","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Translucent red finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Translucent Red is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent red colour. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eTranslucent red transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent Red (#D22630)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Translucent Red x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449551407,"sku":"SSX2TR-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2TR-103A_Anycubic-Water-Wash-Resin-2.0-Trasnslucent-Red_wr_01a.jpg?v=1787927400"},{"product_id":"anycubic-water-wash-resin-2-0-translucent-green","title":"Anycubic Water Wash Resin 2.0 – Translucent Green","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Translucent green finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Translucent Green is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent green colour. Best printed at an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eTranslucent green transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent Green (#009A17)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Translucent Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449584175,"sku":"SSX2TG-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2TG-103A_Anycubic-Water-Wash-Resin-2.0-Trasnslucent-Green_wr_01a.jpg?v=1787927404"},{"product_id":"anycubic-water-wash-resin-2-0-translucent-blue","title":"Anycubic Water Wash Resin 2.0 – Translucent Blue","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Translucent blue finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Translucent Blue is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent blue colour. Best printed at an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eTranslucent blue transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent Blue (#077CAB)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Translucent Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449616943,"sku":"SSX2TB-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2TB-103A_Anycubic-Water-Wash-Resin-2.0-Trasnslucent-Blue_wr_01a.jpg?v=1787927408"},{"product_id":"anycubic-water-wash-resin-2-0-smoky-black","title":"Anycubic Water Wash Resin 2.0 – Smoky Black","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Smokey Black finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Smoky Black is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent smoky black. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eSmoky black transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Smoky Black (#688197)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Smoky Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449649711,"sku":"SSX2SB-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2SB-103A_Anycubic-Water-Wash-Resin-2.0-Smoky-Black_wr_01a.jpg?v=1787927411"},{"product_id":"anycubic-water-wash-resin-2-0-grey","title":"Anycubic Water Wash Resin 2.0 – Grey","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Grey finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Grey is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eGrey colour for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Grey (#7E93A7)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449682479,"sku":"SSX2GY-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2GY-103A_Anycubic-Water-Wash-Resin-2.0-Grey_wr_01a.jpg?v=1787927415"},{"product_id":"anycubic-water-wash-resin-2-0-clear","title":"Anycubic Water Wash Resin 2.0 - Clear","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Clear finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Clear is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent clear. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eClear transparency for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Clear\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/c㎡\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/c㎡\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 - Clear x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449715247,"sku":"SSX2CL-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2CL-103A_Anycubic_Water_Wash_Resin_20_-_Clear_wr_01.jpg?v=1787927420"},{"product_id":"anycubic-water-wash-resin-2-0-black","title":"Anycubic Water Wash Resin 2.0 – Black","description":"\u003cp\u003e\u003cstrong\u003eWater-washable UV resin | Compatible with 365–405 nm MSLA\/LCD printers | Black finish for detailed prints | Rinse clean with water — no harsh solvents needed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA\/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing\u003c\/li\u003e\n\u003cli\u003eCompatible with 365–405 nm MSLA\/LCD resin printers\u003c\/li\u003e\n\u003cli\u003eBlack colour for display models, miniatures, and detail-focused prints\u003c\/li\u003e\n\u003cli\u003eCured hardness of 82–85 HD with tensile strength of 38–43 MPa\u003c\/li\u003e\n\u003cli\u003eLow volume shrinkage rate of 2.2–5.5% for dimensionally accurate output\u003c\/li\u003e\n\u003cli\u003ePost-cure in 3 minutes at 405 nm UV (25,000–30,000 µW\/cm²)\u003c\/li\u003e\n\u003cli\u003ePost-cured resin disposable as standard plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#212721)\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 25-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2-2.5 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Hydrophilic group-modified light-curing resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 190-230\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.07-1.09\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 82-85 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38-43 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 16-22%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 48-60 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 2300-3000 MPa\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 1100-1300 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 133 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 2.2-5.5%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eCleaning: Water\u003c\/li\u003e\n\u003cli\u003eWashing duration: Medium ≥5 min\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal:\n\u003cul\u003e\n\u003cli\u003e1. Do not drain wastewater into sewers to avoid contaminating groundwater.\u003c\/li\u003e\n\u003cli\u003e2. After cleaning, let the wastewater sit in the tank for a period of time.\u003c\/li\u003e\n\u003cli\u003e3. Place it under sunlight to allow the resin in the tank to fully cure.\u003c\/li\u003e\n\u003cli\u003e4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Water Wash Resin 2.0 – Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449748015,"sku":"SSX2BK-103A","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SSX2BK-103A_Anycubic-Water-Wash-Resin-2.0-Black_wr_01a.jpg?v=1787927423"},{"product_id":"anycubic-standard-resin-v2-white","title":"Anycubic Standard Resin V2 - White","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in White is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#EFF0F1)\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449780783,"sku":"SBZ2WH-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2WH-105B_Anycubic-Standard-Resin-V2-White_wr_01a.jpg?v=1787927428"},{"product_id":"anycubic-standard-resin-v2-1kg-hd-grey","title":"Anycubic Standard Resin V2 1kg - HD Grey","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for faster, cleaner results | Low-odour formulation | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in HD Grey is a reformulated photopolymer resin designed for makers, hobbyists, and professionals who demand both precision and durability from their LCD\/DLP prints. Its enhanced toughness formula produces models that resist drops and impacts, flex without brittle fracture, and balance strength with ductility — making it well suited to action figures, consumer electronic shells, tooling fixtures, snap-on parts, and load-bearing structural components. A low-viscosity formulation promotes fast bubble dissipation and excellent resin flow, reproducing fine surface details and reducing overall print time. With a 4.3% volumetric shrinkage rate, the resin delivers superior dimensional accuracy and deformation resistance so your models come out true to design. The low-odour formulation keeps the printing environment comfortable, and broad compatibility with all 405nm UV-curing LCD\/DLP printers means it slots into your existing workflow without fuss. Pre-configured profiles are available in Anycubic's Photon Workshop slicer, so you can achieve consistent, high-quality results from the very first print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReformulated for enhanced toughness — models resist impact and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for superior dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for cleaner surface detail and reduced print time\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003ePre-configured Photon Workshop slicer profiles for consistent print success\u003c\/li\u003e\n\u003cli\u003eClean with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: HD Grey\u003c\/li\u003e\n\u003cli\u003eResin Size: 1kg\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment:20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration: 20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration: 2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 – HD Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449813551,"sku":"SBZ2HG-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2HG-105B_Anycubic_Standard_Resin_V2_1kg_-_HD_Grey_wr_01.jpg?v=1787927433"},{"product_id":"anycubic-standard-resin-v2-clear","title":"Anycubic Standard Resin V2 - Clear","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in Clear is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Clear\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - Clear x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449846319,"sku":"SBZ2CL-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2CL-105B_Anycubic-Standard-Resin-V2-Clear_wr_01a.jpg?v=1787927438"},{"product_id":"anycubic-standard-resin-v2-black","title":"Anycubic Standard Resin V2 - Black","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in Black is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#212721)\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449879087,"sku":"SBZ2BK-105B","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2BK-105B_Anycubic-Standard-Resin-V2-Black_wr_01a.jpg?v=1787927442"},{"product_id":"anycubic-standard-resin-v2-beige","title":"Anycubic Standard Resin V2 - Beige","description":"\u003cp\u003e\u003cstrong\u003eEnhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for fast, clean results | Compatible with all 405nm LCD\/DLP printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic Standard Resin V2 in Beige is a reformulated photopolymer resin designed for makers and hobbyists who demand both strength and detail from their LCD or DLP 3D printer. Its enhanced toughness means finished models resist drops and impacts, flexing without brittle fracture — making it well suited to figurines, enclosures, snap-fit parts, and functional prototypes alike. A low-viscosity formulation promotes rapid resin flow, faster bubble dissipation, and superior bed adhesion, reducing print failures and delivering smoother surfaces with finer detail reproduction. With a 4.3% volumetric shrinkage rate, dimensional accuracy is kept tight so your prints come out true to your design. The resin is compatible with all 405nm UV-curing LCD and DLP printers on the market, and pairs with Anycubic's Photon Workshop slicer, which ships pre-loaded with optimised settings so you can start printing without manual parameter tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced toughness — models resist impacts and flex without brittle fracture\u003c\/li\u003e\n\u003cli\u003e4.3% volumetric shrinkage rate for high dimensional accuracy and deformation resistance\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula with fast bubble dissipation for fine detail and smooth surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior bed adhesion to reduce model detachment and print failures\u003c\/li\u003e\n\u003cli\u003eCompatible with all 405nm UV-curing LCD\/DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with Anycubic Photon Workshop slicer's pre-configured optimal settings\u003c\/li\u003e\n\u003cli\u003eLow-odour formulation for a more comfortable printing environment\u003c\/li\u003e\n\u003cli\u003eCleanable with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Beige (#FCC89B)\u003c\/li\u003e\n\u003cli\u003ePre-print preparation: Shake well before use\u003c\/li\u003e\n\u003cli\u003ePrint environment: 20-40 ℃\u003c\/li\u003e\n\u003cli\u003eFirst layer exposure duration:20-40 s\u003c\/li\u003e\n\u003cli\u003eNormal exposure duration:2.5-3 s\u003c\/li\u003e\n\u003cli\u003ePrint temperature: 20-50 ℃\u003c\/li\u003e\n\u003cli\u003eMaterial: Photopolymer Resin\u003c\/li\u003e\n\u003cli\u003eWavelength: 365-405 nm\u003c\/li\u003e\n\u003cli\u003eViscosity: 250-350\/mPa·s(25℃)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.05-1.25\/g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: 80-83 HD\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 35-45 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 25-30%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 40-50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 1500-2100 MPa\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 1200-1400 MPa\u003c\/li\u003e\n\u003cli\u003eIzod Impact Strength: 192 J\/m\u003c\/li\u003e\n\u003cli\u003eVolume Shrinkage Rate: 4.3-5.6%\u003c\/li\u003e\n\u003cli\u003eCleaning: 95% IPA\u003c\/li\u003e\n\u003cli\u003eWashing duration: ≥3 mins\u003c\/li\u003e\n\u003cli\u003eUV Wavelength: 405 nm\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 18-30 ℃\u003c\/li\u003e\n\u003cli\u003eUV Intensity: 25000-30000 uW\/cm²\u003c\/li\u003e\n\u003cli\u003eCuring time: 3 mins\u003c\/li\u003e\n\u003cli\u003eDisposal: Post-UV-curing resin is treated as plastic waste\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Standard Resin V2 - Beige x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898449911855,"sku":"SBZ2BG-105C","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/SBZ2BG-105C_Anycubic_Standard_Resin_V2_-_Beige_wr_01.jpg?v=1787927448"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-titanium-grey","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Titanium Grey","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Titanium Grey variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Titanium Grey (#545358)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Titanium Grey (#545358)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg – Titanium Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450206767,"sku":"HTFIG-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTFIG-101_Anycubic-PETG-CF-Satin-Carbon-Fiber-Filament-1kg-Titanium-Grey_wr_01.jpg?v=1787927488"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-black","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Black","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Black variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Black (#2D2926)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#2D2926)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg – Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450239535,"sku":"HTFBK-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTFBK-101_Anycubic-PETG-CF-Satin-Carbon-Fiber-Filament-1kg-Black_wr_01.jpg?v=1787927493"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-indigo-blue","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Indigo Blue","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Indigo Blue variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Indigo Blue (#0E4174)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Indigo Blue (#0E4174)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg – Indigo Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450272303,"sku":"HTFAF-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTFAF-101_Anycubic-PETG-CF-Satin-Carbon-Fiber-Filament-1kg-Indigo-Blue_wr_01.jpg?v=1787927497"},{"product_id":"anycubic-tpu-68d-filament-1kg-yellow","title":"Anycubic TPU 68D filament 1kg – Yellow","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Yellow is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Yellow (#F7EA48)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Yellow x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450305071,"sku":"HTAVY-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTAVY-101_Anycubic-TPU-68D-filament-_E2_80_93-Yellow_wr_01.jpg?v=1787927501"},{"product_id":"anycubic-tpu-68d-filament-1kg-red","title":"Anycubic TPU 68D filament 1kg – Red","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Red is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Red (#E10600)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Red x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450337839,"sku":"HTARR-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTARR-101_Anycubic-TPU-68D-filament-_E2_80_93-Red_wr_01.jpg?v=1787927505"},{"product_id":"anycubic-tpu-68d-filament-1kg-neon-green","title":"Anycubic TPU 68D filament 1kg – Neon Green","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Neon Green is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Neon Green\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Neon Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450370607,"sku":"HTANG-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTANG-101_Anycubic-TPU-68D-filament-_E2_80_93-Neon-Green_wr_01.jpg?v=1787927509"},{"product_id":"anycubic-tpu-68d-filament-1kg-grey","title":"Anycubic TPU 68D filament 1kg – Grey","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Grey is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Grey (#969393)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450403375,"sku":"HTAGE-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTAGE-101_Anycubic-TPU-68D-filament-_E2_80_93-Grey_wr_01.jpg?v=1787927514"},{"product_id":"anycubic-tpu-68d-filament-1kg-blue","title":"Anycubic TPU 68D filament 1kg – Blue","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Blue is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Blue (#5E93DB)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450436143,"sku":"HTADB-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTADB-101_Anycubic-TPU-68D-filament-_E2_80_93-Blue_wr_01.jpg?v=1787927518"},{"product_id":"anycubic-tpu-68d-filament-1kg-white","title":"Anycubic TPU 68D filament 1kg – White","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in White is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#F1F0ED)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450501679,"sku":"HTABW-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTABW-101_Anycubic-TPU-68D-filament-_E2_80_93-White_wr_01.jpg?v=1787927523"},{"product_id":"anycubic-tpu-68d-filament-1kg-black","title":"Anycubic TPU 68D filament 1kg - Black","description":"\u003cp\u003e\u003cstrong\u003eFlexible 68D TPU filament | Compatible with Anycubic ACE system | Intelligent spool identification | Broad nozzle compatibility | Ideal for functional, impact-resistant prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic TPU 68D Filament in Black is a functional-grade thermoplastic polyurethane designed for makers who need parts that flex, absorb impact, and hold up under real-world use. With a tensile strength of 23.5 MPa and an elongation at break of 650%, it handles applications like electronic device cases, toys, and sports equipment parts with ease. It supports printing speeds of 40–250 mm\/s at nozzle temperatures between 210–250 °C, and is compatible with all nozzle materials including standard 0.4 mm and above. The spool features intelligent identification support and is reusable, reducing waste. Drying before use is recommended (65–75 °C for 6–8 hours in a convection oven) to ensure optimal print quality and consistent results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e68D hardness TPU formulation suited to flexible, durable functional parts\u003c\/li\u003e\n\u003cli\u003eHigh elongation at break of 650% for excellent flexibility and impact resistance\u003c\/li\u003e\n\u003cli\u003ePrinting speed range of 40–250 mm\/s for compatibility with a wide range of printers\u003c\/li\u003e\n\u003cli\u003eCompatible with all nozzle materials; recommended nozzle size 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE intelligent spool identification\u003c\/li\u003e\n\u003cli\u003eReusable filament spool to reduce material waste\u003c\/li\u003e\n\u003cli\u003eRecommended applications include electronic device cases, toys, and sports equipment parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#101820)\u003c\/li\u003e\n\u003cli\u003eSpool Size: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 65-75 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Supported\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: All Type\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-250 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 35-60 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 12±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 183 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 1.2%\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 23.5±0.5MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 650±20%\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 14±0.5MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional filaments\u003c\/li\u003e\n\u003cli\u003eRecommended to Print: Electronic device cases, toys, sports equipment parts\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic TPU 68D filament 1kg - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450534447,"sku":"HTABK-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HTABK-101_Anycubic_TPU_68D_filament_-_Black_wr_01.png?v=1787927527"},{"product_id":"anycubic-petg-cf-satin-carbon-fiber-filament-1kg-syrup-brown","title":"Anycubic PETG-CF Satin Carbon Fiber Filament 1kg - Syrup Brown","description":"\u003cp\u003e\u003cstrong\u003eCarbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Syrup Brown variant gives you a full run of material ready to load and print.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG\u003c\/li\u003e\n\u003cli\u003eSatin finish conceals layer lines for a cleaner, more refined surface appearance\u003c\/li\u003e\n\u003cli\u003eWater and weather resistant — suitable for functional and semi-outdoor applications\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM 3D printers\u003c\/li\u003e\n\u003cli\u003e1kg spool — Syrup Brown (#99403A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Syrup Brown (#99403A)\u003c\/li\u003e\n\u003cli\u003ePrinter Technology: FDM (Fused Deposition Modeling)\u003c\/li\u003e\n\u003cli\u003eSupporting Filaments: PETG-CF\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: Convection oven 60-65 °C, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003eNozzle Material: Hardened steel\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 240-270 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 65-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 6 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 11 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.32 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 14.1±1.6 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 221 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 74 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 67 ℃\u003c\/li\u003e\n\u003cli\u003eSaturated Water Absorption Rate: 0.38%\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2550±100 Mpa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 54±2 Mpa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±1%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3100±150 Mpa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 88±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 60±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 37±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Functional \u0026amp; Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Toys, functional decorative parts, and fandom\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PETG-CF Satin Carbon Fiber Filament 1kg - Syrup Brown x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450698287,"sku":"HPFVR-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPFVR-101_Anycubic_PETG-CF_Satin_Carbon_Fiber_Fila_wr_01.jpg?v=1787927531"},{"product_id":"anycubic-pc-filament-1kg-white","title":"Anycubic PC Filament 1kg – White","description":"\u003cp\u003e\u003cstrong\u003eEngineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row main-content-wrap\"\u003e\n\u003cdiv class=\"main-content col-lg-12\"\u003e\n\u003cdiv id=\"primary\" class=\"content-area\"\u003e\n\u003cp\u003eThe Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm\/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ\/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.\u003c\/p\u003e\n\u003cdiv id=\"product-7160233\" class=\"product type-product post-7160233 status-publish first onbackorder product_cat-coming-soon product_tag-anycubic-filament-black product_tag-anycubic-pc-filament product_tag-black-pc-filament product_tag-fdm-pc-filament product_tag-high-temp-filament product_tag-pc-3d-printing-filament product_tag-polycarbonate-3d-filament product_tag-polycarbonate-filament-1kg has-post-thumbnail taxable shipping-taxable purchasable product-type-simple product-layout-full_width\"\u003e\n\u003cdiv class=\"product-summary-wrap\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"summary entry-summary col-lg-6\"\u003e\n\u003cdiv id=\"product-tab\" class=\"woocommerce-tabs woocommerce-tabs-3wsymraa resp-htabs\"\u003e\n\u003cdiv class=\"resp-tabs-container\"\u003e\n\u003cdiv id=\"tab-description\" class=\"tab-content resp-tab-content resp-tab-content-active\" aria-labelledby=\"tab_item-0\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering-grade PC filament for structural, functional, and outdoor applications\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature of 110°C — resists warping and deformation under prolonged heat\u003c\/li\u003e\n\u003cli\u003eIzod impact strength of 30±12 kJ\/m² (X-Y) for tough, crack-resistant parts\u003c\/li\u003e\n\u003cli\u003eTensile strength of 65±6 MPa and bending strength of 105±10 MPa\u003c\/li\u003e\n\u003cli\u003eSmooth, translucent, and lustrous surface finish\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system to reduce filament entanglement\u003c\/li\u003e\n\u003cli\u003eActive drying required before use: 80°C for 8–12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#FFFFFF)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 80 ℃, 8-12 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 270-290 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 100-120 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.2 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 15-20 g\/10 min (270℃\/1.2kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 230 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 122 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 110 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 65±6 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 9±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2900±150 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 105±10 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 30±12 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 25±7 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Engineering filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PC Filament 1kg – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450731055,"sku":"HPCWH-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPCWH-101_Anycubic-PC-Filament-1kg-_E2_80_93-White_wr_01.jpg?v=1787927536"},{"product_id":"anycubic-pc-filament-1kg-translucent-white","title":"Anycubic PC Filament 1kg – Translucent White","description":"\u003cp\u003e\u003cstrong\u003eEngineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row main-content-wrap\"\u003e\n\u003cdiv class=\"main-content col-lg-12\"\u003e\n\u003cdiv id=\"primary\" class=\"content-area\"\u003e\n\u003cp\u003eThe Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm\/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ\/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.\u003c\/p\u003e\n\u003cdiv id=\"product-7160233\" class=\"product type-product post-7160233 status-publish first onbackorder product_cat-coming-soon product_tag-anycubic-filament-black product_tag-anycubic-pc-filament product_tag-black-pc-filament product_tag-fdm-pc-filament product_tag-high-temp-filament product_tag-pc-3d-printing-filament product_tag-polycarbonate-3d-filament product_tag-polycarbonate-filament-1kg has-post-thumbnail taxable shipping-taxable purchasable product-type-simple product-layout-full_width\"\u003e\n\u003cdiv class=\"product-summary-wrap\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"summary entry-summary col-lg-6\"\u003e\n\u003cdiv id=\"product-tab\" class=\"woocommerce-tabs woocommerce-tabs-3wsymraa resp-htabs\"\u003e\n\u003cdiv class=\"resp-tabs-container\"\u003e\n\u003cdiv id=\"tab-description\" class=\"tab-content resp-tab-content resp-tab-content-active\" aria-labelledby=\"tab_item-0\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering-grade PC filament for structural, functional, and outdoor applications\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature of 110°C — resists warping and deformation under prolonged heat\u003c\/li\u003e\n\u003cli\u003eIzod impact strength of 30±12 kJ\/m² (X-Y) for tough, crack-resistant parts\u003c\/li\u003e\n\u003cli\u003eTensile strength of 65±6 MPa and bending strength of 105±10 MPa\u003c\/li\u003e\n\u003cli\u003eSmooth, translucent, and lustrous surface finish\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system to reduce filament entanglement\u003c\/li\u003e\n\u003cli\u003eActive drying required before use: 80°C for 8–12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Translucent White\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 80 ℃, 8-12 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 270-290 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 100-120 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.2 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 15-20 g\/10 min (270℃\/1.2kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 230 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 122 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 110 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2550±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 65±6 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 9±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2900±150 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 105±10 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 30±12 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 25±7 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Engineering filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PC Filament 1kg – Translucent White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450763823,"sku":"HPCTW-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPCTW-101_Anycubic-PC-Filament-1kg-_E2_80_93-Translucent-White_wr_01.jpg?v=1787927540"},{"product_id":"anycubic-pc-filament-1kg-black","title":"Anycubic PC Filament 1kg - Black","description":"\u003cp\u003e\u003cstrong\u003eEngineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm\/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ\/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering-grade PC filament for structural, functional, and outdoor applications\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature of 110°C — resists warping and deformation under prolonged heat\u003c\/li\u003e\n\u003cli\u003eIzod impact strength of 30±12 kJ\/m² (X-Y) for tough, crack-resistant parts\u003c\/li\u003e\n\u003cli\u003eTensile strength of 65±6 MPa and bending strength of 105±10 MPa\u003c\/li\u003e\n\u003cli\u003eSmooth, translucent, and lustrous surface finish\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system to reduce filament entanglement\u003c\/li\u003e\n\u003cli\u003eActive drying required before use: 80°C for 8–12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black (#212322)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Required\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 80 ℃, 8-12 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 270-290 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 100-120 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.2 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 15-20 g\/10 min (270℃\/1.2kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 230 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 122 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 110 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2550±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 65±6 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 9±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2900±150 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 105±10 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 30±12 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 25±7 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Engineering filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PC Filament 1kg - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450796591,"sku":"HPCBK-101","price":780.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HPCBK-101_Anycubic_PC_Filament_1kg_-_Black_wr_02.jpg?v=1787927543"},{"product_id":"anycubic-pla-glow-filament-green-green-glow","title":"Anycubic PLA Glow Filament - Green (Green Glow)","description":"\u003cp\u003e\u003cstrong\u003eGlows green in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Glow Filament in Green (Green Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous green glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm\/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlows green continuously for up to 2 hours after a short charge under sunlight\u003c\/li\u003e\n\u003cli\u003eEco-friendly luminescent material — free of heavy metals and radioactive particles\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to bending and tearing for durable decorative prints\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic printers (new version)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and MSDS\/SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Green (Green Glow)\u003c\/li\u003e\n\u003cli\u003eSize: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 60-65 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 162 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 64℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 55 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2200±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50±3 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±3%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2700±50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 82±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 24±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 38±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eRecommended to Print:\n\u003cul\u003e\n\u003cli\u003eDecorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Glow Filament - Green (Green Glow) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450862127,"sku":"HFGGN-105","price":580.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HFGGN-105_Anycubic-PLA-Glow-Filament-Green-Green-Glow_wr_01.jpg?v=1787927548"},{"product_id":"anycubic-pla-glow-filament-white-blue-glow","title":"Anycubic PLA Glow Filament - White (Blue Glow)","description":"\u003cp\u003e\u003cstrong\u003eGlows blue in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Glow Filament in White (Blue Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous blue glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm\/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlows blue continuously for up to 2 hours after a short charge under sunlight\u003c\/li\u003e\n\u003cli\u003eEco-friendly luminescent material — free of heavy metals and radioactive particles\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to bending and tearing for durable decorative prints\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic printers (new version)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and MSDS\/SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (Blue Glow)\u003c\/li\u003e\n\u003cli\u003eSize: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 60-65 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 162 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 64℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 55 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2200±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50±3 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±3%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2700±50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 82±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 24±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 38±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eRecommended to Print:\n\u003cul\u003e\n\u003cli\u003eDecorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Glow Filament - White (Blue Glow) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450927663,"sku":"HFGBL-105","price":580.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HFGBL-105_Anycubic-PLA-Glow-Filament-White-Blue-Glow_wr_01.jpg?v=1787927552"},{"product_id":"anycubic-pla-glow-filament-blue-blue-glow","title":"Anycubic PLA Glow Filament - Blue (Blue Glow)","description":"\u003cp\u003e\u003cstrong\u003eGlows blue in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Glow Filament in Blue (Blue Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous blue glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm\/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlows blue continuously for up to 2 hours after a short charge under sunlight\u003c\/li\u003e\n\u003cli\u003eEco-friendly luminescent material — free of heavy metals and radioactive particles\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to bending and tearing for durable decorative prints\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic printers (new version)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and MSDS\/SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Blue (Blue Glow)\u003c\/li\u003e\n\u003cli\u003eSize: 1kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 60-65 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-70 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 162 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 64℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 55 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2200±100 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50±3 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±3%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2700±50 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 82±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 24±4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 38±3 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eRecommended to Print:\n\u003cul\u003e\n\u003cli\u003eDecorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Glow Filament - Blue (Blue Glow) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898450960431,"sku":"HFGBE-105","price":580.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/HFGBE-105_Aycubic_PLA_Glow_Filament_-_Blue_Blue_Gl_wr_01.png?v=1787927556"},{"product_id":"anycubic-pla-matte-filament-1kg-nardo-grey","title":"Anycubic PLA Matte Filament 1kg - Nardo Grey","description":"\u003cp\u003e\u003cstrong\u003eSmooth matte finish that hides layer lines | Clean support removal with no sanding required | Compatible with 0.2 mm nozzles and above | Pre-configured factory parameters for consistent results | 1 kg spool of FDM PLA filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Matte filament in Nardo Grey is designed for FDM 3D printing enthusiasts who want display-quality results without extensive post-processing. Its fine, uniform matte texture naturally minimises the appearance of layer lines, making it well suited to decorative parts, artistic sculptures, anime figurines, and fandom pieces. Supports peel away cleanly, leaving a smooth contact surface that needs no sanding. Pre-configured with factory-tuned printing parameters, it works at nozzle temperatures between 190 °C and 230 °C, a heated bed of 60–65 °C, and printing speeds from 50 to 250 mm\/s — so you spend less time calibrating and more time creating. The 1 kg spool covers a broad range of projects, and the filament is compatible with any 1.75 mm FDM printer using a 0.2 mm or larger nozzle.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatte texture minimises visible layer lines for cleaner, more realistic prints\u003c\/li\u003e\n\u003cli\u003eSupports remove cleanly and effortlessly — no sanding or post-processing needed\u003c\/li\u003e\n\u003cli\u003ePre-configured factory parameters for consistent, high-quality results straight away\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or above\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for automatic parameter recognition on compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement and feeding errors\u003c\/li\u003e\n\u003cli\u003eCompliant with RoHS, REACH, and SDS certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Matte Nardo Grey (#898B8E)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 190-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 8±3 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 163 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 57 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 54 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2600±150 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38±2 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3200±100 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 67±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 19±1 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±2 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks, anime figurines\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Matte Filament 1kg - Nardo Grey x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451058735,"sku":"AHYGNG-101","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHYGNG-101_Anycubic_PLA_Matte_Filament_1kg_-_Nardo__wr_01.png?v=1787927569"},{"product_id":"anycubic-pla-matte-filament-1kg-white","title":"Anycubic PLA Matte Filament 1kg - White","description":"\u003cp\u003e\u003cstrong\u003eSmooth matte finish that hides layer lines | Clean, effortless support removal | Compatible with 0.2 mm nozzles and above | Printing speeds from 50–250 mm\/s | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Matte Filament is designed for makers who want their prints to look refined straight off the build plate. Its fine, uniform matte texture minimises the appearance of layer lines, making it an excellent choice for decorative parts, display pieces, anime figurines, and artistic models. Supports peel away cleanly with minimal surface marking, reducing the need for post-processing. With a recommended printing temperature of 190–230 °C, a heated bed temperature of 60–65 °C, and compatibility with nozzles 0.2 mm and above, it fits comfortably into most FDM setups. Print speeds of 50–250 mm\/s keep workflow efficient. For best results, dry the filament at 55–65 °C for 6–8 hours before use. A reliable 1 kg spool of matte white PLA for projects where finish and presentation matter.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatte finish reduces visible layer lines for cleaner, more polished prints\u003c\/li\u003e\n\u003cli\u003eSupports remove cleanly and easily, minimising post-processing\u003c\/li\u003e\n\u003cli\u003eCompatible with nozzles 0.2 mm and above\u003c\/li\u003e\n\u003cli\u003eRecommended printing speed of 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003ePrinting temperature range: 190–230 °C; heated bed: 60–65 °C\u003c\/li\u003e\n\u003cli\u003eActive drying recommended at 55–65 °C for 6–8 hours before use\u003c\/li\u003e\n\u003cli\u003e1 kg spool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Matte White (#F1F0ED)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 190-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 8±3 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 163 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 57 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 54 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2600±150 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38±2 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3200±100 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 67±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 19±1 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±2 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks, anime figurines\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Matte Filament 1kg - White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451091503,"sku":"AHYGBW-101","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHYGBW-101_Anycubic_PLA_Matte_Filament_1kg_-_White_wr_01.png?v=1787927573"},{"product_id":"anycubic-pla-matte-filament-1kg-black","title":"Anycubic PLA Matte Filament 1kg - Black","description":"\u003cp\u003e\u003cstrong\u003eFine matte finish that hides layer lines | Clean support removal with no sanding | Pre-configured printing parameters | Compatible with 0.2 mm nozzles and above | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Matte Filament is designed for makers who want their prints to look as good as they perform. Its fine, uniform matte texture naturally conceals layer lines, making it ideal for decorative parts, display models, figurines, and artistic sculptures where surface quality matters. Supports peel away cleanly without sanding or post-processing, saving you time straight off the build plate. The filament ships pre-configured with factory-tuned parameters, so you can load it and print with confidence — no tedious calibration required. Compatible with any 1.75 mm FDM printer using a 0.2 mm nozzle or larger, it runs at a printing temperature of 190–230 °C and a heated bed temperature of 60–65 °C, with recommended speeds of 50–250 mm\/s. A reliable, polished choice for creative prints that deserve a professional finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFine, uniform matte texture minimises visible layer lines for a polished surface finish\u003c\/li\u003e\n\u003cli\u003eSupports remove cleanly and effortlessly, leaving a smooth contact area with no sanding needed\u003c\/li\u003e\n\u003cli\u003ePre-configured with factory-tuned parameters for consistent results straight out of the box\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or larger\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip supported for seamless ACE Pro integration\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded locking system reduces entanglement and feeding errors\u003c\/li\u003e\n\u003cli\u003eCompliant with RoHS, REACH, and MSDS\/SDS certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Matte Black (#484A49)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.2 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 190-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 8 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 8±3 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 163 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 57 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 54 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2600±150 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 38±2 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 13±4%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3200±100 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 67±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 19±1 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±2 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks, anime figurines\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Matte Filament 1kg - Black x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451124271,"sku":"AHYGBK-101","price":400.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHYGBK-101_Anycubic_PLA_Matte_Filament_1kg_-_Black_wr_01.png?v=1787927577"},{"product_id":"anycubic-pla-galaxy-filament-1kg-purple","title":"Anycubic PLA Galaxy Filament 1kg - Purple","description":"\u003cp\u003e\u003cstrong\u003eIridescent starry finish | Standard PLA settings | Shedding-free sparkle | 1 kg spool | Compatible with ACE Pro intelligent identification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Galaxy Filament is designed for makers who want their prints to do more than just hold a shape — it brings decorative models, figurines, and art pieces to life with a shimmering, iridescent finish that shifts with the light. Infused with micro-sparkle powders, this Galaxy Purple filament conceals layer lines and delivers a refined, metallic starry effect straight off the printer. Despite its premium aesthetic result, it uses standard PLA print settings, making it approachable for beginners and reliable for experienced users alike. The sparkle powder is engineered for strong adhesion, so your finished models keep their vibrant finish without shedding over time. Compatible with Anycubic's ACE Pro system, the filament features an intelligent identification chip that allows supported printers to automatically read filament information for a seamless printing experience.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIridescent finish that reveals dynamic colour variations from different angles\u003c\/li\u003e\n\u003cli\u003eMicro-sparkle powders create a refined starry effect and conceal layer lines\u003c\/li\u003e\n\u003cli\u003ePremium sparkle powder adhesion ensures a shedding-free, durable finish\u003c\/li\u003e\n\u003cli\u003eUses standard PLA print settings — no special configuration required\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip integrates with compatible ACE Pro printers for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded connection system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eRecommended for decorative parts, figurines, and artistic prints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Galaxy Purple (#491D70)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-60 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-260 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 10 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.23 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 5.85 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 156 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 56 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 3500±300 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±2%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3500±200 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 95±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 25±3 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 36±1 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Galaxy Filament 1kg - Purple x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451157039,"sku":"AHXKGP-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHXKGP-101_Anycubic_PLA_Galaxy_Filament_1kg_-_Purpl_wr_01.png?v=1787927582"},{"product_id":"anycubic-pla-galaxy-filament-1kg-blue","title":"Anycubic PLA Galaxy Filament 1kg - Blue","description":"\u003cp\u003e\u003cstrong\u003eIridescent starry finish | Standard PLA print settings | Micro-sparkle powder formula | Shedding-free durable surface | Intelligent filament identification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Galaxy Filament (Galaxy Blue) is designed for makers and artists who want their prints to stand out. Infused with micro-sparkle powders, it produces a refined starry, metallic finish that shifts and catches the light from every angle — ideal for decorative parts, figurines, and art pieces. Its unique formula works to conceal layer lines while ensuring excellent sparkle powder adhesion, so your models retain a vibrant, shedding-free finish over time. Despite its premium aesthetic, PLA Galaxy uses standard PLA print settings, making it accessible to beginners and experienced users alike — no special profiles needed. Compatible with any FDM printer accepting 1.75 mm filament and a 0.4 mm or larger nozzle, it prints reliably at 200–230 °C with a heated bed of 60–65 °C and supports speeds from 40 up to 260 mm\/s. For users with compatible Anycubic printers, the built-in intelligent identification chip integrates with the ACE Pro system to automatically read filament information for a seamless printing experience.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIridescent, colour-shifting finish reveals new hues from every angle — perfect for decorative models and art pieces\u003c\/li\u003e\n\u003cli\u003eMicro-sparkle powder formula creates a refined starry, metallic surface and helps conceal layer lines\u003c\/li\u003e\n\u003cli\u003ePremium material composition ensures superior sparkle powder adhesion for a long-lasting, shedding-free finish\u003c\/li\u003e\n\u003cli\u003eUses standard PLA print settings — beginner-friendly and plug-and-play with no special configuration required\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eSupports reusable spool system with threaded connection to reduce entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eMaximum volume speed (flow rate) of 12 mm³\/s for efficient printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Galaxy Blue (#1F2A44)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-60 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-260 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 10 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.23 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 5.85 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 156 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 56 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 3500±300 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±2%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3500±200 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 95±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 25±3 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 36±1 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Product (please verify box contents before approval)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451189807,"sku":"AHXKGL-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHXKGL-101_Anycubic_PLA_Galaxy_Filament_1kg_-_Blue_wr_01.png?v=1787927586"},{"product_id":"anycubic-pla-galaxy-filament-1kg-green","title":"Anycubic PLA Galaxy Filament 1kg - Green","description":"\u003cp\u003e\u003cstrong\u003eIridescent starry finish | Standard PLA print settings | Micro-sparkle, shedding-free surface | 1 kg spool | Compatible with 0.4 mm nozzles and above\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Galaxy Filament is designed for makers who want their 3D prints to stand out with a striking, iridescent metallic finish. Infused with micro-sparkle powders, this 1 kg spool delivers a refined starry effect that shifts appearance with every angle — ideal for decorative parts, figurines, and art pieces where visual impact matters. It uses standard PLA print settings, so there is no need to dial in exotic parameters: simply load, print, and enjoy consistent, reliable results. The premium raw materials ensure excellent sparkle powder adhesion, giving your finished models a durable, shedding-free surface that holds its lustre over time. At a recommended printing speed of 40–260 mm\/s, a nozzle temperature of 200–230 °C, and a heated bed temperature of 60–65 °C, PLA Galaxy slots comfortably into your existing FDM workflow.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIridescent finish that reveals shifting colours from different angles — ideal for decorative models and art pieces\u003c\/li\u003e\n\u003cli\u003eMicro-sparkle powder formula creates a refined starry, metallic effect that conceals layer lines\u003c\/li\u003e\n\u003cli\u003ePremium adhesion engineering ensures a shedding-free, durable sparkle finish that lasts\u003c\/li\u003e\n\u003cli\u003eUses standard PLA print settings — beginner-friendly, plug-and-play experience\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip support for seamless automatic filament recognition on compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eCompatible reusable spool system with threaded connection to reduce entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eDry out before use recommended: 55–60 °C for 6–8 hours for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Galaxy Green (#4E5B31)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-60 ℃, 6-8 h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 200-230 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 60-65 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 40-260 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Time: 10 s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 12 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.23 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 5.85 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 156 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 56 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 3500±300 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 12±2%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 3500±200 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 95±2 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 25±3 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 36±1 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Galaxy Filament 1kg - Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451255343,"sku":"AHXKGG-101","price":640.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHXKGG-101_Anycubic_PLA_Galaxy_Filament_1kg_-_Green_wr_01.png?v=1787927590"},{"product_id":"anycubic-pla-silk-filament-1kg-white","title":"Anycubic PLA Silk Filament 1kg – White","description":"\u003cp\u003e\u003cstrong\u003eLustrous silk finish | Smooth, flexible filament | Multicolour gradient support | Intelligent ACE Pro identification | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Filament in white is designed for makers who want their prints to look as impressive as the ideas behind them. This 1 kg spool delivers a rich, silk-like sheen in a sleek white tone, making it ideal for decorative artwork, display pieces, and fan creations where surface finish matters. Compatible with standard FDM printers using a 0.4 mm nozzle or larger, it prints reliably at 210–240 °C with a heated bed set to 55–56 °C and supports print speeds of 50–250 mm\/s. The filament is also tested for flexibility and resilience, reducing the risk of breakage during feeding — including in multi-material setups like the Anycubic ACE Pro, where the built-in intelligent identification chip allows the printer to read filament information automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing. A straightforward, high-quality material for anyone who wants functional prints with a genuinely elegant finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth, silky-lustre surface finish — ideal for decorative parts, artwork, and display models\u003c\/li\u003e\n\u003cli\u003eMulticolour gradient printing supported — colour transition adjustable by print quantity\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eResilient and flexible — tested to resist breakage during feeding and multi-colour operation\u003c\/li\u003e\n\u003cli\u003ePrints at 210–240 °C nozzle temperature; heated bed at 55–56 °C\u003c\/li\u003e\n\u003cli\u003eRecommended print speed: 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White (#E9E9E7)\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Filament 1kg – White x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451288111,"sku":"AHSCWH-103","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSCWH-103_Anycubic-PLA-Silk-Filament-1kg-White_wr_01.jpg?v=1787927595"},{"product_id":"anycubic-pla-silk-filament-1kg-silver","title":"Anycubic PLA Silk Filament 1kg – Silver","description":"\u003cp\u003e\u003cstrong\u003eLustrous silk finish | Smooth, flexible filament | Multicolour gradient support | Intelligent ACE Pro identification | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Filament in silver is designed for makers who want their prints to look as impressive as the ideas behind them. This 1 kg spool delivers a rich, silk-like sheen in a sleek silver tone, making it ideal for decorative artwork, display pieces, and fan creations where surface finish matters. Compatible with standard FDM printers using a 0.4 mm nozzle or larger, it prints reliably at 210–240 °C with a heated bed set to 55–56 °C and supports print speeds of 50–250 mm\/s. The filament is also tested for flexibility and resilience, reducing the risk of breakage during feeding — including in multi-material setups like the Anycubic ACE Pro, where the built-in intelligent identification chip allows the printer to read filament information automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing. A straightforward, high-quality material for anyone who wants functional prints with a genuinely elegant finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth, silky-lustre surface finish — ideal for decorative parts, artwork, and display models\u003c\/li\u003e\n\u003cli\u003eMulticolour gradient printing supported — colour transition adjustable by print quantity\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eResilient and flexible — tested to resist breakage during feeding and multi-colour operation\u003c\/li\u003e\n\u003cli\u003ePrints at 210–240 °C nozzle temperature; heated bed at 55–56 °C\u003c\/li\u003e\n\u003cli\u003eRecommended print speed: 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Silver (#8D9093)\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Filament 1kg – Silver x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451320879,"sku":"AHSCSL-103","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSCSL-103_Anycubic-PLA-Silk-Filament-1kg-Silver_wr_01.jpg?v=1787927599"},{"product_id":"anycubic-pla-silk-filament-1kg-copper","title":"Anycubic PLA Silk Filament 1kg - Copper","description":"\u003cp\u003e\u003cstrong\u003eLustrous silk finish | Smooth, flexible filament | Multicolour gradient support | Intelligent ACE Pro identification | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Filament in Copper is designed for makers who want their prints to look as impressive as the ideas behind them. This 1 kg spool delivers a rich, silk-like sheen in a warm copper tone, making it ideal for decorative artwork, display pieces, and fan creations where surface finish matters. Compatible with standard FDM printers using a 0.4 mm nozzle or larger, it prints reliably at 210–240 °C with a heated bed set to 55–56 °C and supports print speeds of 50–250 mm\/s. The filament is also tested for flexibility and resilience, reducing the risk of breakage during feeding — including in multi-material setups like the Anycubic ACE Pro, where the built-in intelligent identification chip allows the printer to read filament information automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing. A straightforward, high-quality material for anyone who wants functional prints with a genuinely elegant finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth, silky-lustre surface finish — ideal for decorative parts, artwork, and display models\u003c\/li\u003e\n\u003cli\u003eWarm Copper colour (hex #AF5C37) with vibrant, radiant colour contrast\u003c\/li\u003e\n\u003cli\u003eMulticolour gradient printing supported — colour transition adjustable by print quantity\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eResilient and flexible — tested to resist breakage during feeding and multi-colour operation\u003c\/li\u003e\n\u003cli\u003ePrints at 210–240 °C nozzle temperature; heated bed at 55–56 °C\u003c\/li\u003e\n\u003cli\u003eRecommended print speed: 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Copper (#AF5C37)\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Filament 1kg - Copper x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451353647,"sku":"AHSCCO-103","price":420.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSCCO-103_Anycubic_PLA_Silk_Filament_1kg_-_Copper_wr_01.jpg?v=1787927604"},{"product_id":"anycubic-pla-silk-tri-colour-filament-1kg-red-blue-yellow","title":"Anycubic PLA Silk Tri-colour Filament 1kg – Red\/Blue\/Yellow","description":"\u003cp\u003e\u003cstrong\u003eTri-colour silk gradient in one spool | Silky lustrous finish | Compatible with 0.4 mm nozzles and above | Print speeds up to 250 mm\/s | Supports intelligent filament identification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Tri-colour Filament in Red, Blue, and Yellow is designed for makers who want to elevate decorative prints, fan art, and artistic models beyond single-colour results. Three colours are blended into a single 1 kg spool, producing smooth gradient transitions and a silk-like lustrous finish that shifts visually as the model is rotated. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed — a higher temperature or slower speed increases fluidity and produces a higher-gloss, smoother surface, while cooler or faster settings give a subtler sheen. Compatible with any FDM printer that accepts 1.75 mm filament and a nozzle of 0.4 mm or above, it runs at printing temperatures of 210–240 °C, a heated bed of 55–56 °C, and recommended speeds of 50–250 mm\/s. On compatible Anycubic printers the intelligent identification chip is read automatically, streamlining setup without any manual input. A reliable, visually striking choice for decorative and display-quality 3D prints.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTri-colour gradient (Red, Blue, Yellow) blended in a single 1 kg spool for layered, multi-tone prints\u003c\/li\u003e\n\u003cli\u003eSilk-like lustrous finish that shifts appearance with viewing angle\u003c\/li\u003e\n\u003cli\u003eAdjustable gloss — tune nozzle temperature (210–240 °C) and print speed (50–250 mm\/s) to control surface sheen\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip for automatic filament recognition on compatible Anycubic printers\u003c\/li\u003e\n\u003cli\u003eSuited to decorative parts, fan art, figurines, and display models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Red Blue Yellow (#003594,#F3D03E,#D22630)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Tri-colour Filament 1kg – Red\/Blue\/Yellow x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451583023,"sku":"AHSC18-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC18-103_Anycubic_PLA_Silk_Tri-colour_Filament_Re_wr_01.png?v=1787927608"},{"product_id":"anycubic-pla-silk-dual-filament-1kg-black-red","title":"Anycubic PLA Silk Dual Filament 1kg – Black\/Red","description":"\u003cp\u003e\u003cstrong\u003eDual-colour silk luster in one spool | Smooth gradient finish straight off the printer | Compatible with all 1.75 mm FDM printers | Adjustable gloss via nozzle temperature and speed | Designed for decorative prints and artistic models\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Black\/Red is designed for makers who want their prints to stand out with a rich, layered visual effect without any post-processing. The dual-colour silk formula blends black and red into a seamless gradient that shifts and catches the light as the model rotates, giving finished pieces a premium, almost metallic sheen. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity for a high-gloss, silky surface, while cooler, faster settings yield a softer lustre. The filament is compatible with any 1.75 mm FDM printer and works at a printing temperature of 210–240 °C with a heated bed set to 55–56 °C and a recommended print speed of 50–250 mm\/s. Dry the spool at 55–65 °C for 6–8 hours before use to ensure clean, consistent extrusion. Ideal for decorative parts, fan art, and artistic models where visual impact matters.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-colour silk PLA combines Black (#212721) and Red (#D22630) in a single strand for eye-catching gradient prints\u003c\/li\u003e\n\u003cli\u003eSilk-like surface luster shifts across the colour spectrum as the model is rotated, adding depth and a premium finish\u003c\/li\u003e\n\u003cli\u003eControllable gloss — adjust nozzle temperature and print speed to dial in high-gloss or softer lustre results\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers; no specialist hardware required\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic ACE Pro systems for automatic print-parameter recognition\u003c\/li\u003e\n\u003cli\u003eCertified to RoHS, REACH, and SDS standards\u003c\/li\u003e\n\u003cli\u003eRecommended for decorative parts, fandom models, and artistic prints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black Red (#212721,#D22630)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament 1kg – Black\/Red x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451615791,"sku":"AHSC17-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC17-103_Anycubic_PLA_Silk_Dual_Filament_BlackRed_wr_01.png?v=1787927612"},{"product_id":"anycubic-pla-silk-dual-filament-1kg-blue-green","title":"Anycubic PLA Silk Dual Filament 1kg – Blue\/Green","description":"\u003cp\u003e\u003cstrong\u003eSilk-smooth dual-colour gradient | Blue\/Green colour blend | Compatible with 0.4 mm nozzles and above | Printing speeds 50–250 mm\/s | Supports intelligent filament identification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Blue\/Green is designed for makers, hobbyists, and artists who want their FDM prints to stand out with a rich, layered colour gradient and a lustrous silk-like finish. The dual-colour formulation blends a deep blue (#003594) with a forest green (#006F44), producing a flowing colour transition across every layer that shifts and catches the light as the model is rotated. By adjusting the nozzle temperature within the 210–240 °C range or varying the print speed between 50 and 250 mm\/s, you can dial in the level of surface gloss — higher temperatures and slower speeds yield a smoother, higher-sheen finish, while cooler, faster settings produce a more matte result. The filament has been tested through thousands of bending and tearing cycles to ensure consistent feeding and uninterrupted print runs, and it carries an embedded intelligent identification chip that allows compatible Anycubic printers to read filament information automatically. Ideal for decorative parts, fan art, and display pieces, this filament works with any 1.75 mm FDM printer fitted with a 0.4 mm or larger nozzle.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-colour gradient blends blue (#003594) and green (#006F44) for a rich, layered visual effect\u003c\/li\u003e\n\u003cli\u003eSilk-like luster shifts appearance with viewing angle, giving prints a premium, sophisticated finish\u003c\/li\u003e\n\u003cli\u003eAdjustable gloss — tune nozzle temperature (210–240 °C) and print speed (50–250 mm\/s) to control surface sheen\u003c\/li\u003e\n\u003cli\u003eEmbedded intelligent identification chip integrates with compatible Anycubic printers for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eTested for superior flexibility and durability through thousands of bending and tearing cycles\u003c\/li\u003e\n\u003cli\u003eCompatible with any 1.75 mm FDM printer using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSuited for decorative parts, fandom models, and artistic display pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Blue Green (#003594,#006F44)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament 1kg – Blue\/Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451681327,"sku":"AHSC16-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC16-103_Anycubic_PLA_Silk_Dual_Filament_BlueGree_wr_01.png?v=1787927616"},{"product_id":"anycubic-pla-silk-tri-color-filament-red-yellow-green","title":"Anycubic PLA Silk Tri-Color Filament – Red Yellow Green","description":"\u003cp\u003e\u003cstrong\u003eTri-colour silk finish in Red, Yellow \u0026amp; Green | Smooth, lustrous surface quality | Wide printing speed range of 50–250 mm\/s | Compatible with 0.4 mm nozzles and above | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Tri-Color Filament in Red, Yellow and Green is designed for makers who want to add visual depth and a premium silk-like lustre to their FDM prints. The tri-colour construction blends three distinct hues across the filament strand, producing layered gradients and rich colour transitions that give finished models a sophisticated, eye-catching texture. It works with any FDM printer fitted with a 0.4 mm or larger nozzle, with a recommended printing temperature of 210–240 °C, a heated bed set to 55–56 °C, and a print speed range of 50–250 mm\/s. Luster is also controllable: higher nozzle temperatures and slower print speeds increase filament fluidity, resulting in a smoother, higher-gloss surface. Each spool weighs 1 kg and should be dried at 55–65 °C for 6–8 hours before use for best results — a reliable material for decorative parts, fan art, and display models.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTri-colour filament combines Red, Yellow, and Green for rich gradient and layered visual effects\u003c\/li\u003e\n\u003cli\u003e1kg spool for extended printing sessions and larger projects\u003c\/li\u003e\n\u003cli\u003ePLA-based material — easy to print and widely compatible with FDM printers\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eResilient and flexible — tested to resist breakage during feeding and multi-colour operation\u003c\/li\u003e\n\u003cli\u003ePrints at 210–240 °C nozzle temperature; heated bed at 55–56 °C\u003c\/li\u003e\n\u003cli\u003eRecommended print speed: 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Red Yellow Green\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Tri-Color Filament – Red Yellow Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451714095,"sku":"AHSC15-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC15-103_Anycubic_PLA_Silk_Tri-Color_Filament_Red_wr_02.png?v=1787927620"},{"product_id":"anycubic-pla-silk-tri-colour-filament-1kg-blue-green-purple","title":"Anycubic PLA Silk Tri-colour Filament 1kg – Blue\/Green\/Purple","description":"\u003cp\u003e\u003cstrong\u003eTri-colour silk gradient in blue, green \u0026amp; purple | Adjustable gloss finish | Flexible and reliable printing | Compatible with 1.75 mm printers | Ideal for decorative prints and artwork\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Tri-colour Filament in Blue\/Green\/Purple is designed for makers who want their prints to go beyond the ordinary. This 1 kg spool combines three complementary colours — blue, green, and purple — into a single filament that produces natural gradient transitions and a lustrous, silk-like surface finish as the print builds layer by layer. By adjusting nozzle temperature and print speed within the recommended range of 210–240 °C and 50–250 mm\/s, you can dial the surface sheen from a subtle satin to a high-gloss finish, giving you direct control over how the final model looks. The filament has passed extensive bending and tearing tests, delivering the flexibility needed for smooth, uninterrupted runs — making it a reliable choice for decorative parts, fan art, and artistic models. Compatible with any 1.75 mm filament printer using a 0.4 mm or larger nozzle, it slots into your existing workflow without fuss.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTri-colour gradient (blue, green, purple) produces rich, layered colour transitions across the printed surface\u003c\/li\u003e\n\u003cli\u003eSilk-like luster shifts with viewing angle, giving finished models a premium, eye-catching finish\u003c\/li\u003e\n\u003cli\u003eControllable gloss — raise nozzle temperature or lower print speed to increase surface smoothness and shine\u003c\/li\u003e\n\u003cli\u003ePrinting temperature range of 210–240 °C and recommended speed of 50–250 mm\/s suits a wide range of FDM printers\u003c\/li\u003e\n\u003cli\u003eCompatible with any 1.75 mm filament printer fitted with a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eProven flexibility through extensive bending and tearing tests for reliable, uninterrupted printing\u003c\/li\u003e\n\u003cli\u003eComplies with RoHS, REACH, and SDS certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Blue Green Purple (#003594,#006F44,#452B6F)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Tri-colour Filament 1kg – Blue\/Green\/Purple x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451746863,"sku":"AHSC14-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC14-103_Anycubic_PLA_Silk_Tri-colour_Filament_Bl_wr_01.png?v=1787927625"},{"product_id":"anycubic-pla-silk-dual-filament-1kg-red-blue","title":"Anycubic PLA Silk Dual Filament 1kg – Red\/Blue","description":"\u003cp\u003e\u003cstrong\u003eSilk-gloss dual-colour PLA filament | Gradient colour shifting in a single pass | Adjustable luster via temperature and speed | 1 kg per roll | Compatible with all 1.75 mm FDM printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Red\/Blue is designed for makers who want visually striking, multi-toned prints without the complexity of a multi-extruder setup. The dual-colour construction produces a rich gradient effect that shifts across the model's surface as each layer is laid down, delivering a premium silk-like luster that catches the eye from any angle. You can fine-tune the finish by adjusting nozzle temperature and print speed — a higher temperature or slower speed produces a smoother, higher-gloss surface, giving you direct control over the final look. Compatible with any FDM printer that accepts 1.75 mm filament, it prints at a nozzle temperature of 210–240 °C with a heated bed at 55–56 °C and supports speeds from 50 to 250 mm\/s. Each roll weighs 1 kg and is rated for decorative parts, fan art, and artistic models where appearance is the priority.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-colour construction produces a seamless gradient effect across printed surfaces in a single pass\u003c\/li\u003e\n\u003cli\u003eSilk-like luster that shifts and deepens when the model is rotated, adding visual depth and a premium feel\u003c\/li\u003e\n\u003cli\u003eAdjustable finish — increase nozzle temperature or reduce print speed for a higher-gloss, smoother surface\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers; no multi-extruder setup required\u003c\/li\u003e\n\u003cli\u003eSupports Anycubic ACE Pro intelligent identification for automatic filament recognition (internet connection required)\u003c\/li\u003e\n\u003cli\u003eReusable spool with threaded locking system reduces entanglement and filament scatter\u003c\/li\u003e\n\u003cli\u003eCertified to RoHS, REACH, and SDS standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Red Blue (#E63888,#003594)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament 1kg – Red\/Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451812399,"sku":"AHSC13-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC13-103_Anycubic_PLA_Silk_Dual_Filament_RedBlue_wr_01.png?v=1787927629"},{"product_id":"anycubic-pla-silk-dual-filament-red-gold","title":"Anycubic PLA Silk Dual Filament - Red\/Gold","description":"\u003cp\u003e\u003cstrong\u003eDual-colour silk finish in one spool | Adjustable gloss with temperature and speed | Reliable flexibility for uninterrupted prints | Compatible with all 1.75 mm FDM printers | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Red\/Gold is designed for makers who want their prints to turn heads. This dual-colour silk PLA combines red and gold in a single spool, producing a layered, gradient visual effect that shifts and shimmers as the model is rotated — ideal for decorative parts, figurines, fan art, and display pieces. You can control the level of gloss by adjusting your nozzle temperature and print speed: a higher temperature or slower speed increases filament fluidity, resulting in a smoother, higher-gloss surface finish. After thousands of bending and tearing tests, the filament has demonstrated strong flexibility and consistent feed performance. Print at speeds between 50 and 250 mm\/s with a nozzle temperature of 210–240 °C and a heated bed at 55–56 °C. For best results, dry the filament at 55–65 °C for 6–8 hours before use. Compatible with any FDM printer that accepts 1.75 mm filament and a 0.4 mm or larger nozzle — a reliable, eye-catching material for your next creative project.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-colour red and gold silk PLA in a single 1 kg spool — no colour-mixing hardware required\u003c\/li\u003e\n\u003cli\u003eSilk-like lustrous finish that produces shifting gradients and a premium texture from any angle\u003c\/li\u003e\n\u003cli\u003eControllable gloss level: increase nozzle temperature or reduce print speed for a higher-gloss surface\u003c\/li\u003e\n\u003cli\u003eProven flexibility after thousands of bending and tearing tests for smooth, uninterrupted printing\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification when used with compatible Anycubic ACE Pro systems\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and SDS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Red Gold (#D22630,#FFC600)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament - Red\/Gold x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451877935,"sku":"AHSC12-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC12-103_Anycubic_PLA_Silk_Dual_Filament_-_RedGol_wr_02.png?v=1787927633"},{"product_id":"anycubic-pla-silk-dual-filament-1kg-pink-gold","title":"Anycubic PLA Silk Dual Filament 1kg - Pink\/Gold","description":"\u003cp\u003e\u003cstrong\u003eSilk-lustre dual-colour PLA filament | Gradient pink and gold finish | Adjustable gloss via print settings | Compatible with 0.4 mm nozzles and above | Suitable for decorative prints and artistic models\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Pink\/Gold is designed for makers who want their prints to stand out with a rich, multi-tonal finish. The dual-colour silk formulation blends pink and gold tones into a gradient effect that shifts as the model is rotated, lending finished pieces a premium, layered appearance suited to decorative parts, fan art, and artistic projects. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity, producing a smoother, higher-gloss result. The filament prints at 210–240 °C with a heated bed set to 55–56 °C and accommodates speeds of 50–250 mm\/s, giving you the flexibility to balance quality and throughput. Use a 0.4 mm nozzle or larger for best results, and dry the filament at 55–65 °C for 6–8 hours before use to ensure consistent extrusion.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-colour Pink\/Gold silk finish creates a gradient, multi-tonal effect that shifts with viewing angle\u003c\/li\u003e\n\u003cli\u003eAdjustable luster — increase nozzle temperature or reduce print speed for a higher-gloss, silky surface\u003c\/li\u003e\n\u003cli\u003ePrinting temperature range of 210–240 °C suits a wide variety of FDM printers with a 0.4 mm or larger nozzle\u003c\/li\u003e\n\u003cli\u003eRecommended print speed of 50–250 mm\/s for flexible throughput without sacrificing surface quality\u003c\/li\u003e\n\u003cli\u003eHeated bed temperature of 55–56 °C for reliable first-layer adhesion\u003c\/li\u003e\n\u003cli\u003eDry before use at 55–65 °C for 6–8 hours to maintain filament integrity and consistent flow\u003c\/li\u003e\n\u003cli\u003eComplies with RoHS, REACH, and SDS certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Pink Gold (#F67599,#F2A900)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament 1kg - Pink\/Gold x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451943471,"sku":"AHSC11-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC11-103_Anycubic_PLA_Silk_Dual_Filament_-_PinkGo_wr_01.png?v=1787927638"},{"product_id":"anycubic-pla-silk-dual-filament-1kg-black-purple","title":"Anycubic PLA Silk Dual Filament 1kg - Black\/Purple","description":"\u003cp\u003e\u003cstrong\u003eDual-colour gradient silk finish | Smooth, high-lustre surface | Compatible with 1.75 mm FDM printers | Printable at 50–250 mm\/s | Intelligent identification supported\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Black\/Purple is designed for makers, artists, and hobbyists who want their prints to do more than just hold a shape. The dual-colour gradient construction blends deep black and rich purple into a seamlessly shifting, silk-like finish that catches the light differently from every angle — ideal for decorative parts, fan art, figurines, and display pieces. By adjusting nozzle temperature and print speed within the recommended 210–240 °C and 50–250 mm\/s ranges, you can dial the surface gloss up or down to suit the look you're after. The filament supports intelligent identification when paired with compatible Anycubic printers, streamlining setup automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing, and use a nozzle of 0.4 mm or larger. A reliable, visually striking material for FDM prints that deserve a premium finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-colour gradient blends black and purple for a rich, layered visual effect\u003c\/li\u003e\n\u003cli\u003eSilk-like lustre that shifts with viewing angle, giving prints a premium aesthetic\u003c\/li\u003e\n\u003cli\u003eAdjustable surface gloss — tune temperature and speed to control sheen level\u003c\/li\u003e\n\u003cli\u003eCompatible with all 1.75 mm FDM printers; no special hardware required\u003c\/li\u003e\n\u003cli\u003eSupports intelligent identification on compatible Anycubic printers for seamless setup\u003c\/li\u003e\n\u003cli\u003eRecommended for decorative parts, fan art, figurines, and display models\u003c\/li\u003e\n\u003cli\u003eCertified to RoHS, REACH, and SDS standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black Purple (#212721,#7249C7)\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003cli\u003eSize: 1KG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament 1kg - Black\/Purple x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898451976239,"sku":"AHSC10-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC10-103_Anycubic-PLA-Silk-Dual-Filament-Black-Purple_wr_01a.jpg?v=1787927642"},{"product_id":"anycubic-pla-silk-dual-filament-black-green","title":"Anycubic PLA Silk Dual Filament – Black Green","description":"\u003cp\u003e\u003cstrong\u003eSilk-lustre dual-colour PLA filament | Striking Black Green gradient finish | Adjustable gloss via temperature and speed | Compatible with 0.4 mm+ nozzles | 1 kg spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Black Green is designed for makers and hobbyists who want their prints to stand out with a rich, layered aesthetic. Combining deep black and bold green in a single strand, this dual-colour silk PLA produces a flowing gradient effect that shifts and catches the light from every angle, giving decorative prints, fan art, and artworks a premium, polished look. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed delivers a high-gloss silky surface, while cooler, faster settings yield a subtler sheen. Compatible with any FDM printer using a 0.4 mm or larger nozzle, it runs cleanly at 210–240 °C with a heated bed set between 55 and 56 °C, and prints reliably at speeds from 50 up to 250 mm\/s. Dry the filament at 55–65 °C for 6–8 hours before use for best results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Greencolour blend produces a lustrous, metallic silk finish\u003c\/li\u003e\n\u003cli\u003e1kg spool for extended printing sessions and larger projects\u003c\/li\u003e\n\u003cli\u003ePLA-based material — easy to print and widely compatible with FDM printers\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eResilient and flexible — tested to resist breakage during feeding and multi-colour operation\u003c\/li\u003e\n\u003cli\u003ePrints at 210–240 °C nozzle temperature; heated bed at 55–56 °C\u003c\/li\u003e\n\u003cli\u003eRecommended print speed: 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black Green\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament – Black Green x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898452009007,"sku":"AHSC09-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC09-103_Anycubic_PLA_Silk_Dual_Filament_Black_Gr_wr_02.png?v=1787927646"},{"product_id":"anycubic-pla-silk-dual-filament-black-blue","title":"Anycubic PLA Silk Dual Filament – Black Blue","description":"\u003cp\u003e\u003cstrong\u003eDual-colour silk finish in Black \u0026amp; Blue | Compatible with 0.4 mm nozzles and above | Printing speeds from 50–250 mm\/s | Intelligent identification chip supported | Reusable filament spool included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Anycubic PLA Silk Dual Filament in Black Blue is designed for FDM 3D printing enthusiasts who want to elevate their prints with a striking two-tone silk finish. The black and blue colour combination transitions naturally through each layer, giving decorative parts, fan creations, and artworks a sophisticated, premium texture with a smooth silky luster. Compatible with any printer accepting 1.75 mm filament and a 0.4 mm or larger nozzle, it prints at speeds between 50 and 250 mm\/s with a recommended nozzle temperature of 210–240 °C and a heated bed temperature of 55–56 °C. By adjusting nozzle temperature and print speed, you can dial in the level of gloss on the finished surface — higher temperatures and slower speeds produce a higher-shine silk effect. The filament also features an intelligent identification chip that works seamlessly with compatible Anycubic printers for automatic print-parameter recognition, and the reusable spool system reduces waste and keeps your workspace tidy. Dry the filament at 55–65 °C for 6–8 hours before use for best results.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Blue colour blend produces a lustrous, metallic silk finish\u003c\/li\u003e\n\u003cli\u003e1kg spool for extended printing sessions and larger projects\u003c\/li\u003e\n\u003cli\u003ePLA-based material — easy to print and widely compatible with FDM printers\u003c\/li\u003e\n\u003cli\u003eIntelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition\u003c\/li\u003e\n\u003cli\u003eResilient and flexible — tested to resist breakage during feeding and multi-colour operation\u003c\/li\u003e\n\u003cli\u003ePrints at 210–240 °C nozzle temperature; heated bed at 55–56 °C\u003c\/li\u003e\n\u003cli\u003eRecommended print speed: 50–250 mm\/s\u003c\/li\u003e\n\u003cli\u003eReusable filament spool with threaded locking system to reduce entanglement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black Blue\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eDry Out Before Use: Recommended\u003c\/li\u003e\n\u003cli\u003eDrying Condition: 55-65℃, 6-8h\u003c\/li\u003e\n\u003cli\u003eACE Compatibility: Compatible\u003c\/li\u003e\n\u003cli\u003eNozzle Size: Recommended 0.4 mm or above\u003c\/li\u003e\n\u003cli\u003ePrinting Temperature: 210-240 ℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 55-56 ℃\u003c\/li\u003e\n\u003cli\u003eRecommended Printing Speed: 50-250 mm\/s\u003c\/li\u003e\n\u003cli\u003eMaximum Volume Speed (Flow Rate): 8 mm³\/s\u003c\/li\u003e\n\u003cli\u003eDensity: 1.22 g\/cm³\u003c\/li\u003e\n\u003cli\u003eMelt Index: 9±1 g\/10 min (190℃\/2.16kg)\u003c\/li\u003e\n\u003cli\u003eMelting Point Temperature: 164 ℃\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 54 ℃\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (0.45MPa): 53 ℃\u003c\/li\u003e\n\u003cli\u003eYoung’s Modulus: 2000±200 MPa\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 37±4 MPa\u003c\/li\u003e\n\u003cli\u003eElongation at Break: 28±5%\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 2400±160 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 66±4 MPa\u003c\/li\u003e\n\u003cli\u003elzod lmpact Strength (X-Y): 20±2 kJ\/m²\u003c\/li\u003e\n\u003cli\u003eTensile Strength (Z): 12±4 MPa\u003c\/li\u003e\n\u003cli\u003eFilament Type: Aesthetic filaments\u003c\/li\u003e\n\u003cli\u003eRecommend to Print: Decorative parts, fandom, artworks\u003c\/li\u003e\n\u003cli\u003eIntelligent Identification: Supported\u003c\/li\u003e\n\u003cli\u003eReusable Filament Spool: Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic PLA Silk Dual Filament – Black Blue x1\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":45898452041775,"sku":"AHSC08-103","price":480.0,"currency_code":"NAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/5165\/5471\/files\/AHSC08-103_Anycubic_PLA_Silk_Dual_Filament_Black_Bl_wr_02.png?v=1787927651"}],"url":"https:\/\/shop.pektech.com.na\/collections\/3d-printer-materials.oembed","provider":"PEKTECH","version":"1.0","type":"link"}